Verify that you have an internet connection by connecting your computer directly to the modem or the router. Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client. Powerline is great for when you need a wired internet connection somewhere that’s far away from your router. If you have an out-house in your garden, for example, where power is already supplied from your house, then this is a great way to send an internet connection to it. You can even plug a basic router in at the other end to set up a Wi-Fi connection, if your Powerline adapter doesn’t already do that. A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade Note: If the Powerilne LED is off, refer to What should I do if the Powerline LED is off? for detailed information.

All powerline adapters share some common factory settings, and can communicate with one another. If you want your powerline adapters to communicate only with your own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired. For the past eight years I’ve been using Powerline adapters from Solwise. Indeed, they’re old enough that Solwise don’t even sell Powerline kits any more, let alone provide up-to-date firmware. And, with only the occasional blip, it’s worked really well. Nevertheless, I decided to try out the TP-Link versions to see if, in those intervening years, the technology has moved on. Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.

AV1000 Speeds and 300 Meters Range

The Power Saving feature takes effect when your appliances are disconnected or turned off. Actual power saving data will vary in different network conditions and environments.

Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles:

Gigabit-poort voor maximale connectiviteit

Avoid plugging in powerline adapters and high-powered household devices (such as washing machines and refrigerators) close to one another. b .Within two minutes, press the Pair button on the new powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED turns on, the pairing process is complete. The big problems with powerline networking is that you need to have all the connecting adapters on the same mains ring and transmission can be subject interference. When would you use powerline? How to add an extra Powerline adapter to the existing Powerline network by adding the powerline key on tpPLC Utility(new designed blue UI) 06-28-2022 75786 IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Tips: We recommend that you plug in your powerline devices near each other, or as close to each other as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are needed once pairing is complete.Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Powerline adapters may cause intermittent connection of DSL modem router in a few rare cases 03-24-2022 70831 For example, I’ve extended my network using the Plug & Play method. Now I want to secure my network. For example, I have a router in my house, but there are not enough LAN ports for all my wired devices. I don’t want complex and expensive cabling. People told me that I can solve this problem with two powerline adapters. Plug the other powerline adapter into a wall outlet on the same electrical circuit. Wait until the powerline LED turns on.

You plug one adapter (it doesn’t matter which, as they’re identical) near to your router and connect an Ethernet cable (provided) between the two. You then plug the other adapter wherever else in the house you need it and use another Ethernet cable to plug that into the device you need to connect to the internet. In my case, my games console. And that’s it. As long as all three lights are green on both adapters, then everything is working just great. Using the tpPLC utility Try to set up a powerline network by pairing. Refer to the section above Secure Your Powerline Network by Pairing for instructions. Feature Filter: All Q&A of functional explanation or specification parameters User Application Requirement Configuration Guide Troubleshooting FAQs Connect one of the powerline adapters to an available LAN port of the router using an Ethernet cable.

To Upgrade

Q4. What can I do if a successfully-paired powerline device does not reconnect after it has been moved to a new location ? How to add an extra Powerline adapter to the existing Powerline network by adding the the powerline key on the Utility(Green UI) 06-28-2022 103610 When using this guide, please notice that features of the powerline adapter may vary slightly depending on the model and software version you have. The powerline adapter availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual powerline adapter experience.