Bathroom lights over and around mirrors are key for providing focused task lighting when using the mirrors. Whether choosing wall-mounted lights around or above the mirror or incorporating lighting as part of the mirror, as many modern designs will do, illuminating mirrors is key to a well-functioning bathroom space.

LED Bathroom Lighting | SimplyLED LED Bathroom Lighting | SimplyLED

This area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is 240v a 30ma residual current device (RCD) must also be used to protect the circuit in this zone. This is inside the bath or shower itself. Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof. No two bathrooms are the same. That’s why we offer a versatile range of LED bathroom lights and bathroom LED downlights to help you add some well-thought-out illumination to your home interiors. No matter the fittings you have available, we have the energy-saving LED products you need. For example, view our popular choice of lighting solutions for wall fixtures, suspended ceiling fixtures, and surface ceiling fixtures. Our low-wattage LED bathroom lights are designed to offer the equivalent familiar performance in terms of brightness (lumens) that you expect from your halogen or CFL bulbs at a fraction of the running costs. You can also benefit from superb long-life reliability. Enjoy 15 - 20 years of output from your LED bathroom lights. When planning the lighting for your bathroom, remember that you want it to work equally well at all times of the day and throughout the year. Whether it's dark winter mornings or sunny summer evenings.

Is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required. In addition it is good practice to consider the area around a wash basin, within a 60cm radius of any tap to be considered as zone 2.

Bathroom Lighting | Indoor Lighting | Screwfix Bathroom Lighting | Indoor Lighting | Screwfix

Combat a windowless bathroom with lots of ambient light. Subtle led strip lighting attached to the mains looks sophisticated running under a mirrored cupboard for a clean, streamlined look, while a pair of wall lights either side will strike a classic note. What is good lighting for a bathroom? Consider lighting the jewelry of your bathroom," says Bryan Johnson, CEO of Shades of Light. "Be sure to coordinate finishes within a bathroom, particularly between your mirror, faucet and lighting. They don’t need to match, but you do want each of these pieces to complement each other, especially when so close together. If you have a frameless mirror, this could allow you to focus more on the lighting or faucet." Zone 0, is inside the bath or floor of the shower. Any fitting used in this zone must be low voltage and be rated at least IP67 which is total immersion proof. Zone 1, is the area above the bath or shower to a height of 2.25m from the floor. A minimum rating of IP45 is required, but it is generally accepted that IP65 is to be used.Zone 1 is the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is fed by 240v supply a 30ma residual current device (RCD) must also be used to protect the circuit in this zone. SELV - safety extra low voltage lighting can be used such as 12v fittings with 12v lamps but the transformer must be located in zone 3 i.e. in furniture, under the bath or in the ceiling void. That said fittings in zone 1 can still be damaged by water and by the damp environment and while you will be safe you from electrocution you may not want your fittings to rust and corrode. For any bathroom area outside these zones,an IP rating isn’t a requirement, although a minimum IP44 rating is still advised. Choose task lighting, such as overhead spotlights in the shower and around sink units to add maximum coverage. Wall lights and mirror surrounds can welcome focused directional light when using the vanity. Add ambient lighting around the bath and in alcoves and niches. Dimmers or adjustable lighting is key for being able to control the amount of light throughout the day. Our waterproof LED strip lights for bathrooms come with remote control and sensor options. Installing bathroom LED light strips is easy and controlling them remotely can provide independence to individuals with reduced mobility. There could be nothing easier than being able to switch off or change the colour of your lights at the touch of a button.