Thank you for getting in touch with your question, because oils penetrate the surface of the wood there is little reflective surface and so little shine. If you're mixing colours, you may find that pine stain with a small amount of walnut may get you a light oak colour.

What is french polishing? - All Finishes What is french polishing? - All Finishes

Once you have sanded to remove the current finish and any marks, you can sand at a 100 grit and if filler is required this is the time to apply it. Then sand for the final time at a 150 – 180 grit sandpaper, always in the direction of the grain of the wood. I would also recommend a good wipe down with Methylated Spirits to clean and remove and resins or grease on the wood. Doing this can also highlight any flaws in the wood that may require further sanding before you apply a product. The best retailer of French oak hardwood will keep a very close eye on the shape and grade of every single plank they sell. This ensures that customers get the right standard of material consistently across the whole consignment. Anything less than this degree of quality control could leave you with an imperfect finish on your hardwood flooring. If you are investing in the best, you certainly want the finished result to reflect that! Design excellence and flooring choices MoneySavingExpert.com is part of the MoneySuperMarket Group, but is entirely editorially independent. Its stance of putting consumers first is protected and enshrined in the legally-binding MSE Editorial Code. Give new life to your wooden surfaces with the Dulux Woodsheen Varnish. With this brilliant varnish you can bring some elegance to your home. French oak flooring can be constructed from either new or reclaimed wood. New French oak flooring is engineered to have the same look and feel as authentic French oak and can be an affordable alternative when using reclaimed wood is not feasible.It has been allowed to grow slowly (unlike American Oak for example) to maximise density, strength and other natural performance characteristics. You may be able to remove much of the teak oil by using a clean, white (uncoloured) lint-free or microfibre cloth dampened in white spirit. This will help to dissolve the teak oil and you should be able to wash out and wipe it off. The only other alternative is to sand the teak oil out but you will unfortunately loose the raised grain look that you like. These penetrative oils penetrate the surface of the wood and require just two very thin coats to be applied. They do require application to bare wood.

French oak flooring for your home in How to choose the right French oak flooring for your home in

French Polishes are made up from flaked shellac dissolved in methylated spirit. The type of shellac used can vary in colour from a light clear colour to a dark brown colour. And I would also recommend the application of the Osmo WR Base Coat before the oil as this will further help to prevent mould build up. And then two thin coats of the Osmo Oil.

MSE News

All our French Oak comes with our ultra-protective Induro Oil finish as standard. If you want your table to stay looking like brand new with virtually no maintenance, this is the finish for you. In terms of stain resistance, nothing we’ve seen comes even close. It’s been tested against everything you can imagine, including turmeric, wine, olive oil and hot coffee. All of these can be wiped away with a lightly damp cloth. The finish can be easily refreshed in situ (if needed), unlike traditional lacquered finishes. As they are needed for May my recommendation will be to try a test application now on one, with something like the Osmo Wood wax Finish Extra Thin see if it soaks in okay and dries and if that works carry out the rest, but be prepared that long term the finish may fail, if you just require them for the wedding and the test works okay then it is a short term fix. White Polish has a milky appearance and can be used on light timbers such as ash and natural light oak.