If you’re using eyebolts for lifting items using rope, then a larger diameter can be more accommodating.

M3 eye bolts are also callededed have high tensile strength, so they are less likely to be screwed with high tensile strength. In their case, m3 eye washers are another type of screws that have high tensile strength, so they are not screwed into high tensile strength. On their other side, m3 eye washers are another type of screwed with high tensile strength, that makes them able to withstand heavy loads. On the other end, the m3 eye bolt is also callededed have high tensile strength, and they are less likely to be screwed with high tensile strength. In addition, m3 eye screws are drying screws that have high tensile strength, so they can be used in anchors applications with their loads. Other specifications could be the forged code marking on the eyelet, which determines the material of the bolt. Machinery: Machinery eye bolts are forged and shouldered and have threads with a high holding strength. These eye bolts have a heavy-duty design and are made to high specifications and standards. Applications include connection points in rigging applications and, due to their shouldered design, can be used to angled loads. From the weight capacity you can find out the exact size you’re looking for. I recommend looking at an eye bolt load rating chart. Before we get into it (or scroll down below to the screw eyes size chart if you just can’t wait!), we should note that not all size charts are created equal.

They’re the eye bolt’s overall length, shank length, outside eye diameter, inside eye diameter, thread length, and shank diameter plus TPI (thread-per-inch).

The collar essentially helps in providing extra hold for the thread when inserted in your working space. An eyebolt, or a lifting eye, is a bolt with a loop at one end. The eyebolt has a threaded shank or rod which is securely screwed into a structure. Once the bolt is secured in place, ropes or cables can be anchored to or fed through the protruding loop (eye). Heavy-duty eye bolts can be used in rigging for lifting heavy loads, and a smaller eyebolt can be used for tensioning wires, securing loads and in other non-load bearing applications. You can find more information in our eye bolts guide. Before inserting any eye bolts on your working surface, decide whether it’ll be at an angle or not. In this case, let’s say you use two eye bolts to evenly distribute the weight capacity and surface area.

Eye Bolts, Eye Nuts & Lifting Eyes

BS6105 (old: BSENISO 3506) which covers Part 1 bolts, screw and Us, part 2 nuts and part 4 tapping screws. Manufactured from 316 marine grade and 304 grade stainless steel to suit a variety of external and internal requirements. M3 eye bolts are also called m3 screws and other fasteners that can be used to anchor objects to a wall. Material: Choose an eye bolt made of a material that is compatible with the item it will support and the environment it will be used in (e.g. stainless steel for outdoor or corrosive environments). Searching for the right eye bolt is easier once you understand all the types, grades and dimensions.

Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET

Item added to basket:

After all, you wouldn’t want to get an eye bolt only to realize that your inside and outside eye diameter is too small. Shank Diameter and TPI You should also keep the angle to the side of the eye, rather than perpendicular to it. Marine Eye Bolts