The minimum water pressure recommended for smooth working is 0.2 bar [LP-Low Pressure] and a maximum of 5.0 bar [HP-High Pressure]. Formed from perfect metal in a dramatic vintage style with crosshead levers, the design is sure to make maximum impact at the bathtub. The entire product is made out of the highest quality brass, which stops it from rusting over time. The tap measures 340 millimetres in height. This tap creates a traditional look to your bathroom when used with a traditional towel rail. The whole assemblage must be tightened with the help of a wrench. A slight bending of the angled bolt is perfectly natural as the bolt adjusts itself to the slope of the bathtub feet

Turn the bath upside down (you'll need some help to do this, the bath is extremely heavy!) and attach the feet. Some models have different feet configurations for each lug. If this is the case you will find identifying letters on the inside part of each foot, which should be attached to the lug with corresponding letter, by matching up the letter on the feet to the corresponding lug on the bath. Adjust the feet to its best concordance, using the slots on both bathtub lugsand feet, (please note that as long as the feet maintained grasped in the bathtub, it’s not