For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Our 3M™ Perfect-It™ Denibbing System is a revolutionary way to remove dirt defects in auto body paint surfaces. Use with a denibbing pad: 3M™ Perfect-It™ Foam Buffing Pad (sold separately) View more details For industrial/occupational use only. Miniature solid tungsten carbide de-nibbing tool for quickly and easily removing paint drips, runs, sags and dirt from smooth surfaces.

Tough moulded hand sanding block with sprung metal clips to hold abrasive sanding paper firmly in place, gives a better finish on flat surfaces and avoids raw finger ends. Highly flexible aluminium oxide abrasive which is resin-over-resin bonded to a J weight cotton cloth backing.Maximum 12,000 RPM; Weight 150g Medium density; 51 Hole Dust Extraction; Both a 5/16 inch and M8 screw fitting are provided. The 3M™ Perfect-It™ Denibbing System also includes a handheld dual-action, air-powered polisher, along with Perfect-it™ Denibbing Polish and 3M Perfect-it™ Ultrafine Machine Polish. Aluminium oxide closed grit, resin bonded heavy E-weight paper ideal for low pressure sanding and grinding of wood, metal, filler, lacquer and primers. Bolts quickly and securely to 3M™ Polisher for efficient use View more details For industrial/occupational use only.

We intentionally created this color scheme to help indicate which products should be paired together. Also as the instructions on the tin say to sand the bare wood to 120 grit so I would need to use the same grit between coats and then like 600 grit after the final coat? The strong net structure resists high wear and tear which makes the Abranet Ace HD ideal for heavier duty applications. Use the 2000 grade disc for denibbing of water-base coats while the vehicles are in the spray booth. Perfect-It™ Denibbing Polish was engineered to reduce the time it takes to remove these tiny but noticeable imperfections.Denibbing is the removal of “nibs” and imperfections from your finish, and it should be performed between each coat of any finish applied. Ideal for sanding rounded surfaces, internal coving, spindles and anything else you can wrap your hand around. Join our mailing list to receive exclusive discounts and be kept up to date with any promotions, new product releases and how-to guides. Velcro / Hook n Loop face which accepts all 70 x 125mm grip strips such as Fossa evoMESH, Mirka Q Silver or Abranet abrasives. DIY 6in/150mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad.

However I also used these for a little table - and even though I'm careful the edges and corners soon shred them up. Because of their flexibility and versatility, de-nibbing pads are now widely used by painters, decorators and craftsman and are often used in place of the more traditional sanding papers.This durable 75 mm back-up pad provides extra support during the critical polishing stage of small area repair.

I have heard that denibbing is a good thing to do after each coat of finish so I wanted to get some advice on where to get the pads from and what sort of grits?Get our specialist 3M Paint Preparation Pads to prepare panels before painting and keying alloy wheels and bumpers ready for refinishing. Mirka Mirlon denibbing pads are especially designed for sanding surfaces prior to the application of finishing coats, primers or lacquers.