Processors have become far more powerful over recent years with more cores and better efficiencies throughout the manufacturing process. Still, AMD and Intel are in a constant struggle against heat output in the attempt to extract as much performance from internal components as possible. This is where AIO liquid coolers come into play.

I know the 3000 series have some idle power issues right now, but that still seems a bit much for me. My preferred spot for an AIO in that case is in the side as intake. However, before considering a move, it might be good to figure out if things are cooler over there or abnormally warm up top. Not sure if you have a surface temp thermometer around, but even the ones for people will work on non-reflective surfaces to at least give you a ball park value. RGB is useless bling that does nothing for performance, but Corsairlink does have some RGB support if I chose to use it. Harness the power of iCUE with the included iCUE Commander CORE to control the fan speed and RGB lighting for the included ML RGB fans, with the potential to control additional CORSAIR RGB fans, up to a total of six. In setting fan speeds, this is much simpler as we can define the PWM control of the fan to be exactly 100% or exactly 50%, which is a precise measurement of the fan RPM with very minimal average fluctuation over time.

Specialized Cooling Modes

I have similar build as OP. 5900x ryzen 9 with RTX 3090 MSI suprim. At idle I get around 39 deg celsius and just under 50 deg celsius for the pump temp under gaming load. (using the h150i elite cappelix. Is this normal? Fans are QLs and set to default quiet profile. Is performance drastically different if I use the included MLs? Harness the power of iCUE with the included iCUE Commander CORE to control the fan speed and RGB lighting for the included ML RGB fans, with the potential to control additional CORSAIR RGB fans, up to a total ofsix. How does this compare your internal case or room temps? Most people will idle about 4-7C above the room temp, but this is very case and power level specific. Someone with a TR on High Performance in a glass box is going to be quite high, while an old Sandy Bridge that drops to 0.60v and stays there will be quite low. This seems to be where you are losing ground. The Corsair iCUE H150i ELITE CAPELLIX liquid CPU cooler provides extreme performance and flashy RGB light shows. It sports a graceful design using a slender 360mm radiator paired with three 120x25mm magnetic levitation RGB fans. The base uses a split-flow copper cold plate with 128 micro-skived fins per inch. Skiving provides excellent thermal transfer and having such a high density will provide a lot of cooling performance.

ML might make a slight difference (1-2C), but not really worth fussing over unless you are at a specific temp limit. The delta for gaming (39 to 50C) is basically at the +10C I generally quote as expected. It's the 39C baseline that is higher. Install the 4 Intel standoff screws into your motherboard. Make sure all 4 screws are tightened until secure. The gpu will certainly heat up the inside so the Cyberpunk results don’t surprise me. The prolonged time after gaming at high temps suggests environmental heat, but can also be a restricted cooler. How does the 48C compare to something like the motherboard sensor or any other internal temp data? However all that said, when I ran the O11D as a dual 360mm radiator exhaust and completely passive intake from the rear and bottom, my idle coolant temps were no where close your levels. My max load levels were about your idle temps in the Winter with a similar 22C ambient. Something isn't quite right. The part I don't like is with the glass off and a 22C room ambient, it should take deliberate gaming load or hours of idle time before you should see a coolant temp creep to +13C over ambient and frankly I don't think it should ever be +13C over ambient at idle in that case. This is great in concept, except that the reality is that not every cooler manages to reach the same dB level at peak operation or lowest noise levels as every other cooler. Some coolers are not seen to operate at 35 or 40dB while others easily exceed it. These same coolers in comparison alsonobtiba How to show phone screen on TV or bigger screen while the phone has to use device network to control the device? ( 2)

Make sure that the header is USB and, if the header does not have a plastic guide around it, make sure that the connector is plugged in to all the pins. vinay2070 said:It would be easier to interpret results if you can include dB normalised temperature graphs for a couple of dBs. :) User error - many parts for the system builder to correctly install and maintain, where AIOs are factory built and sealed. Just more pieces to have awareness around.

The Corsair iCUE software worked perfectly for controlling the fan speeds and RGB lighting of everything, while also showing the pump RPM. Another nice feature is the included iCUE Commander CORE can readily accept up to three more RGB fans. Installation is a breeze, as everything is labeled very clearly and supports basically every AMD and Intel processor released in roughly the last decade. Tản nhiệt nước Corsair H150i ELITE CAPELLIX sử dụng quạt PWM cung cấp luồng gió mạnh mẽ, giúp CPU được mát mẻ kết hợp với 8 đèn LED RGB trên mỗi cánh quạt cùng tạo ra buổi trình diễn ánh sáng tuyệt đẹp.

Possibly that is the reason. This morning I monitored the liquid temps on the pump starting the computer out cold (22deg celsius) and it gradually climbed on idle up to 35 deg celsius. The gradual heat increase from the gddr6 of the 3090 heating the case? Support for the iCUE H150i Elite Capellix covers all of the current processors! AM4, sTR4, and sTRX4 are supported out of the box for AMD, while on the Intel side, there are 115X, 1200, and 2011(V3)/2066 support. The last bit in the chart covers the five-year warranty. With 16 RGB LEDs on a modern pump head design, the ELITE series deliver great cooling with the looks to match. Watercooling isn't difficult as long as you consider total thermal load volume in watts and what your cooling goals are. Next, make sure that your Windows system is up to date with all major, critical, and optional updates.CORSAIR AF RGB ELITE PWM fans deliver massive low-noise airflow with AirGuide technology for extreme CPU coolingperformance. Three ML 120 RGB fans are included, featuring eight RGB LEDs each and magnetic levitation for their bearings. These fans have PWM control, provide up to 75 CFM of airflow, 4.2 mm-H2O of pressure, and genertate up to 37 dBA of sound. Each fan has two cables: one for the fan power and another for the RGB controls. Both AIOs use the same generation of Asetek pump, which is more than capable of handling the heat output of an AMD Ryzen Threadripper or Intel Core i9 processor, especially when paired with a massive 360mm radiator. A major difference here is the type of fans used. The Elite Capellix comes with three ML RGB series blowers, while the more expensive Elite LCD has ML ELITE fans.