Once whatever was connected I turned pc on to ensure everything was working then installed the CAM software. The software is intuitive and easy to utilize. The fan LED can by resolved separately however I simply opted for one color. There is likewise RGB lighting on the pump which can also be changed. The temps on idle are in between 30-33 degrees. Whilst gaming it’s generally 40-50 degrees however on certain CPU demanding games it does go higher. Tension testing on Aida 64 the temperatures were in between 65-70 degrees. Temperatures will vary depending on what CPU you have so my outcomes will likely be various to yours. A few essential tips when installing AIO coolers vertically, the radiator pipes must be on the bottom. if they’re on the top, you’re most likely to get some gurgling sounds from the pump as any trapped air bubbles might get drawn into the pipelines and create a gurgling sound. If you’re mounting the radiator to the top of the case, the position of the pipes does not matter, simply whatever works finest for your layout. This Kraken Z73 is perfect for anyone creating a build that has looks and function in mind, and as for me served as the perfect last touch to my construct.

NZXT Kraken X73 RGB All In One 360mm Intel/AMD CPU - Scan

First off installation is a little a trouble with this due to the additional connections that the little screen needs. For some this may end up being a dealbreaker because of the fact that it might not fit in some smaller sized type factor builds or even a Mid-tower ATX develop with all the RAM slots inhabited. The CAM software works great and have actually had no issues that everyone else is discussing. Took me no time at all to get it up and running. Explaining all the details of these new NZXT Kraken X-3 RGB AIOs may be repetitive reading for those of you who caught our original review of the Kraken X-3 and Z-3 series earlier this year, if that applies to you then you might want to skip past this introduction as the only significant change with this new bunch of AIOs is the addition of RGB fans, and of course the inclusion of the 240mm Z53 which was missing from the original launch in July. If you’re trying to find the bets liquid CPU cooling system possible, NZXT is usually a great option. The NZXT Kraken X73 and NZXT Kraken Z73 are two examples of Kraken X and Z Series that provide better cooling and allows you to personalize and customize the look of your CPU cooler. We’ll help you choose which one you should get by comparing them here. We will compare NZXT Kraken X73 vs Z73 in depth and find all their differences as well as give an assessment of which liquid CPU cooler is a better and more logical choice.If you are planning on the screen dealing with right side up, one more thing to be conscious of is that unlike what the handbook says there are only 2 viable setup directions. It’s real that there is a method to rotate the image through the NZXT CAM software application however if it isn’t installed in one of the previously mentioned orientations then regrettably it wont be able to turn it to the appropriate orientation which appears like an odd constraint but it is what it is.

Kraken X3 Series Installation Video – NZXT Support Center Kraken X3 Series Installation Video – NZXT Support Center

Next action is to connect the fans to your motherboard. In my case I have the nzxt controller so I just linked the fans to the splitters linked to the controller. The other choice is to link the cable television provided to the motherboard and then connect the fans to the fan splitters. If you do this then I don’t believe you can manage the RGB lights as they require to go through the controller. HUE 2 Channel Output LED Qty.: Up to four LED strips – 10 LEDs per strip, Up to five Aer RGB fans, Up to six HUE 2 accessories The design of this AIO is similar to what we've seen before from NZXT and that's a good thing. These are among the best-looking AIOs out there and the performance has usually been pretty good to match. Everything is included to wire everything up so you can manipulate the pump speed using NZXT's CAM software.Displays on computer components seem to be a trend these days. Motherboards and computer cases, have it. And now, even AIO liquid coolers have it. Another noticeable difference between the two types of fans is the speed range, The original Aer P 120mm fans offer a range of 500-2000 RPM while the new Aer RGB 2 120mm units speed range is reduced to 500-1500 RPM. The new Aer RGB 120mm fan also features 2 more blades and a sharper blade angle compared with the Aer P, so it will be interesting to see how these changes of blade design and rotational speed affect thermal performance. In general, this is a nice addition, but in my modest viewpoint, a little pricey for what it is and what it does compared to other choices out there.