So, the longer a spring sits tightened or wound, the more it loses its force as it starts to take the shape it is coiled in. This loss of force is one reason recoil starters don’t always work as well as a new spring. If you have a Stihl MS180C lawnmower, one of the most common problems is that the pull cord wears out and eventually breaks. This can be a difficult task, but with the right tools and instructions, it can be done in a relatively short time.

In this guide, we have thoroughly explained the most simple steps included in this procedure – so that you can save both money and time by fixing this problem yourself. Next, use your nut driver to remove the center bolt holding the metal/plastic disc in place. Then, lift off the disc and remove the two pawls. You can set these parts aside for later. Remove the Rotor Pulley As you can see, there are several components within a recoil starter. So, it could be that more than one part is at fault. To resolve your starter issues, you’ll need to investigate and pin down the part or parts that are faulty. Let’s take a look at the potential causes. Broken Rotor Pulley A broken pull cord can pose a safety hazard, leading to unintentional engine starts or preventing the engine from starting altogether. By replacing the pull cord, you can make sure that your hedge trimmer starts safely and according to your control, minimizing any possible risks associated with a faulty cord.

more about start systems

It’s essential to replace the pull cord as soon as you notice any of these signs. Delaying the replacement of the pull cord can lead to further damage and more expensive repairs. As I mentioned before, the recoil starter sits on top of the flywheel. Now, if you look closely at the cooling fins on top of the flywheel, you will notice that they have a habit of getting covered in grass clippings and dirt. Engaging in regular maintenance practices, such as replacing the pull cord when needed, can effectively increase the lifespan of your Stihl hedge trimmer. This particular approach not only certain optimal performance but also translates to long-term cost savings. By taking proactive measures to maintain your hedge trimmer, you can avoid early wear and tear, ultimately saving money over time. Convenience: Two small pawls connect the recoil starter to the top of the flywheel. These two little lugs are often made of plastic and catch the flywheel when you pull the cord and then retract once you let go of the cord. The pawls move in and out with centrifugal force and need to be unobstructed and free to move.

Over time, the pull cord can become worn or broken. If this happens, it may be difficult to operate the chainsaw. If you notice that the pull cord on your Stihl MS 180c chainsaw is worn or broken, you should replace it as soon as possible. Before looking at the steps, you need to take to replace the pull cord, let me reveal a few tools that you should have to make the task done: Rather than repairing the damaged, old pull rope, replacing the cord with a new one is the perfect option. And this can be easily accomplished and only includes some simple steps. Remember that the safety tips and instructions for use may vary from one product to another – so make sure you read the Stihl hs80 hedge trimmer manual efficiently and take your time! The first place to look for a replacement pull cord is at your local hardware store. They will likely carry a variety of different brands and styles of replacement cords, so it is important to find the right one for your mower. Which is the best Stihl ms180c pull cord replacement?Next, when you have the cord hooked, unwind the cord from the pulley, so all that is left is the knot in the cord attached to the pulley. Then take a pair of scissors and cut off the knot. If you’re good with knots, you could try to remove the knot, but I find a pair of scissors much easier. One really important step in how to fix a pull start that won’t retract is setting the correct tension on the cord. If it’s too loose, then the cord won’t retract, and if it’s too tight, you could end up damaging the spring. Therefore getting the tension just right is super important. Overall, substituting the pull cord on your Stihl Hedge Trimmer can improve your equipment’s functionality. It’s a small but significant repair that can make a big difference in the performance of your hedge trimmer. Find the correct size pull cord for your Stihl ms 180c saw. The pull cord size is marked on the saw frame. If you’re having trouble with your Stihl MS180c’s pull cord, we have some tips to help you get it replaced.The pull cord is a small, thin piece of metal that runs along the top of the engine. It connects the handle to the carburetor. The cord can break or become tangled, which can cause the engine to not work properly. When and why we should replace the pull cord on a Stihl MS 180c chainsaw?