One method is to use wire hangers attached at both ends to the light cord. This is the easiest way to hang them, but it takes some effort to get them evenly spaced. Another option is using rope hangers. These are attached at one end only, so you need to make sure they’re positioned perfectly or they’ll droop down below the light cord. Rope also gives you more flexibility in positioning the light strands. 2. Choose The Right Lights Along a wood fence. If you have a wood fence that isn’t high enough for the lights, attach 10-foot-long wooden posts with cup hooks on the top to bump up the height of the lights. Space the wooden posts along the fence posts, or roughly 8 feet apart. Secure the wooden posts to the fence posts by side-nailing (nailing at an angle), or use a drill to secure them with screws into the fence. Hang outdoor string luster on stucco to create a festive atmosphere. Use wire hanger hooks to easily attach the luster to the stucco. Drill small holes into the hooks and screws, then insert the screws into the light fixtures. Line up the hooks with corresponding holes and tighten the screws to secure them in place. Final Thought

My patio dining space at my old house was right next to the house, with no convenient trees nearby. So while we could hang them from hooks on the house side, we really needed some poles on the other side of the patio.Hanging outdoor string rope can provide an elegant and festive look to your home or garden. Not only do they add a touch of glamour, but they are also very practical in terms of providing light during the night or in low-light conditions. A downside to many traditional lighting options is that they can be difficult to Install on surfaces such as stucco. However, with the help of a skilled installer, hanging rope lamps can be a simple and cost-effective solution for adding beautiful lighting to your property. Best Tips For Hanging Outdoor String Lights On Stucco

If you are hanging rope lights close to a roofline or other high spot, it is important that you use a sturdy light fixture with a long cord. If the cord is too short, the lamps will be at an awkward angle and may not look as good as it could. The mounting locations for your strings should follow these guidelines: Hanging – Make sure the lights are hung well above head level. This will prevent children and other large animals from climbing up and impressing themselves on the luster. Pushing – If you want to hang your lights higher up on a wall or other structure, you’ll want to push them outwards so that they don’t touch the ground. On the other hand, If you want to hang them vertically, you will want to push them outwards. So that they reach a sufficient height.Therefore that they can be balanced properly when the sun goes down. Vertical – If you want your lights vertical, you’ll want to push them outwards. So that they can be suspended by either horizontal supports or even wooden planks. This option is the best for both aesthetic and functional reasons. Keep reading this if you’re planning on adding outdoor rope luster to your landscape or build project. 4. Will To Screw In The Cup HooksMeasure for length and roughly choose your light configuration . Before purchasing string lights, run a tape measure along the distance you’d like to hang lights, including any zigzags or crisscrosses for the configuration. This can be a fairly rough estimate, such as three times across a 25-foot-wide patio; just get a sense of the length of lights you need.