The HiKOKI NR90GC2J8Z 7.2V 2x1.5Ah Clipped Head Gas Framing Nailer Kit is an ideal set for professional carpenters, roofers and upholsterers. It contains the NR90GC2 cordless gas framing nailer which has a magazine capacity of 37 nails and can fire up to 1000 nails per hour. These assets will allow you to work more efficiently as you will not have to charge the battery too often. With a full sequential actuation type, this nailer is also highly efficient.

In this short guidewe’ll look at how to clean Hitachi nailers using the 705470 cleaning kit. We’ve detailed each step of the process below and you can watch a Hitachi NR90GC nail gun being cleaned in our Toolstop TV video.The exhaust valve (rubber shaped band/o-ring around cylinder) damaged, missing, or not fitting snugly- replace or repair to fit.

Step 6: turn your attention to the impeller blade on the motor. If this needs cleaned, again use the aerosol, brush and cloth.If your Hitachi roofing nailer thrusts the nails too profoundly onto the surface, you may follow the instruction below. Weighing just 3.2kg and being a cordless power tool it can be manoeuvred easily and used in awkward spaces. The ergonomic grip provides user comfort and reduces fatigue over prolonged use. This nailer comes with two 7.2V 1.5Ah batteries, a charger, safety glasses and a carry case for storage and transportation. Excessive air pressure might be pushing the nails too deep. Reduce the air pressure from your compressor to drive nails more accurately. Step 3: inside the motor chamber you’ll find 4 nuts that will need to be removed using the Allen key. A red cable marks the spark charger which will need to be removed and the power supplied needs to be decoupled