Be sure to exercise caution and use a straight edge or ruler to ensure clean and accurate cuts. Adhesive Tape I mean this is one of the things that any dart lover just wants to have. The neat way it stays on the wall, the looks, and the smooth bar vibe it gives. It can serve other purposes too when you are not playing. I know many people prefer steel-tip, especially if you play competitively so soft-tip darts might not be the best option but if you really want to prevent holes in the wall or floor – they might be the best option! Dartboard cabinets are the perfect way to protect your walls from darts. They come in various sizes and styles to fit any décor, and they keep your darts safe and out of the way when you’re not using them.

Hanging the dartboard on a garden fence when playing outdoors is not recommended, as it can damage your darts. Plywood – A piece of 1m x 1m plywood or OSB sheet can be screwed into the wall and decorated to be a permanent fixture which you can then mount a dartboard onto. The best solution here is to get a 2m x 2m sheet of plywood that you can just lean on the wall behind the dartboard and then store away when not in use. The Viper Defender III offers everything the Defender II offers with an extended length bottom segment to protect the space below your board. This provides added protection to your wall where it is needed most.

Types of dartboard backgrounds

Most surrounds are only a few inches wide, so the protection they offer is limited. They should not be dismissed because of this limitation. If you are a player of even moderate skill level, you know it is not often you miss the board, and only minimal protection is required.

There are many options to suit your style and budget. We will cover everything from high-end dartboard wall protectors to some cheap DIY options for wall protection. If you are playing outside, you might consider hanging your dartboard on a fence. Depending on the fence, there could be different concerns as you can damage the fence, and you can damage the darts as well. Reclaimed construction materials can add a unique, rustic, or industrial look to your game cave. You can leave these materials as-is, or you can repaint them, sand them, or otherwise polish their appearances to match your game room.As you can see, there are lots of things you can put behind a dart board to protect the wall. Apart from the protector we’ve discussed above, you can also try Cork Bulletin Board, Styrofoam, or Old Clothes based on your preferences, budget, and skill level. But don’t ignore these essentials before start practicing dart board or you can damage the wall and beauty of the home. Additional Questions It will help to absorb some of the impacts from darts that don’t make it into the board and can also help to reduce noise. The above two are by far the easiest solutions to implement. The dartboard surround as an example simply fits around the dartboard and doesn’t require any tools, skills, or knowledge to mount it so, in my opinion, this is the easiest solution. Measure and mark the height: The center of the bullseye should be 5 feet 8 inches (1.73 meters) from the ground. Use a measuring tape to mark this height on the wall. In conclusion, the Dartboard Wall Protector DIY is a practical and cost-effective solution for safeguarding your walls while enjoying the game. By constructing a protective barrier around your dartboard, you can prevent unsightly wall damage and extend the longevity of your walls.