MEASURING CHOKES — The BoreMaster as the “De-Liar.” The results obtained by measuring your fixed or screw-in chokes will surprise you. What one manufacturer calls Mod is another’s I.C. Buy screw-in chokes (12 ga) designated for steel shot and I.C. may be 0.003″ Modified around 0.010″ and Full AT 0.018″. These are readings from a Perazzi Mirage with Briley thin wall chokes for steel shot. Those of you with Polychokes can now accurately find the TRUE choke constriction for each designation on the Polychoke. These numbers will both surprise and enlighten you and add to the usefulness of this great product.

Shotshell Reloading - Reloading UK Shotshell Reloading - Reloading UK

The Universal Fitting Fixture by Graco Corp is designed to securely hold GraCoil, Graco Adjustable Butt Plates, recoil pads, or other butt plate hardware while cutting and grinding to proper size and contours.

The Dent Raiser is 22-3/8" (56.8cm) long, has a 1" (2.5cm) dia. hardwood handle, and is suitable for Universal Shotguns. Detailed operating and maintenance instructions are included. The Shotgun Combo Gauge is an accurate and convenient device that measures all of the outside dimensions of your shotgun, which you need to know if you want your gun to fit properly: The tool is made of hardened steel shank and plastic handle, providing maximum control and leverage. It eliminates the frustration of scratching and gouging the plunger or inner receiver surfaces with an ordinary screwdriver. MEASURING CHAMBER LENGTHS. When buying or evaluating British and Continental guns, chamber length is a critical factor in the gun’s value. An expensive side-by-side marked 2-1/2″ chamber length on the barrel flats may be worth its full value until you measure the chamber length with the BoreMaster and discover that during the gun’s life, someone lengthened the chambers without reproofing the gun. Now what is it worth? Have the forcing cones been altered? CHAMBER — Chamber dimensions — Chamber length — Forcing cone dimensions and rifle chambers with diameter dimensions of .400″ and up.

Tools - Tesco Groceries Tools - Tesco Groceries

The punch is built to withstand maximum impact with a minimum of distortion. It comes with interchangeable and replaceable tips made of nylon, brass, and aluminum for different levels of impact. The Briley 20 GA. Tube Wrench is a universal wrench that fits all factory choked shotguns and Briley X-2 tubes, except for Briley special thinwall tubes. Remember, when measuring with the BoreMaster, you CANNOT push into a measurement – you must insert the probes beyond the measuring point, then WITHDRAW the BoreMaster, allowing the spring pressure to do the measuring without interference from your hand.The Remington/Mossberg Forend Wrench by Brownells is a durable tool that is adapted from the Remington factory design. It comes with a pilot that keeps the teeth square to the forend nut, which virtually eliminates damage to the wrench, forend, or forend nut. The 20-gauge version of the wrench is 7-7/8" (20cm) long overall, with a 5" (12.7cm) long handle. The replacement sleeve is sold separately for 12 gauge only. This product falls under the Forend Wrenches category. The Jig is composed of an adjustable triangle and a universal support, making the entire pad mounting operation a simple 15-minute exercise. The XS Sight Systems Magazine Tube Detent Swage is a tool that allows for the easy removal of magazine tube detents in Remington shotguns without creating holes or damaging the tube.

Shotgun Tools on 52 Products | Brownells

Made with a plastic knob, aluminum fingers and handle, and stainless steel body, this choke tube wrench is available in both 12 gauge and 20 gauge. Spring-loaded probes always exert equal pressure on the bore, making readings accurate and repeatable

Shotgun bore diameters are all over the place, varying as much as 2% of nominal diameter. An example of this is an underbored Perazzi 28 gauge measuring .537/.538 (nominal is .550), a Browning Double Auto made around 1957 at .720 and a 1964 Browning Superposed 20 gauge at 0.625 (overbored). The question is how does one confirm that the BoreMaster is reading accurately? The method we use to verify the bore measurement is by measuring the CHAMBER dimensions. The chambers are typically held to a very tight spec which we measure to the thousands. Chamber dimensions are provided with the BoreMaster Instructions. Brass templates are available to prevent cutting into steel reinforcement plates while shaping a recoil pad. The templates work with all closed-side Pachmayr recoil pads. Universal Shotguns with 12 Gauge, 20 Gauge, .410 Bore, and 28 Gauge can use this bore gauge set. The direct-reading dial indicator mounted on a 16½" long shaft shows dents, bends, and other imperfections. The set is an excellent choice for professionals who require high accuracy in their work. Before the detent style magazine spring & mag cap retention system, installing a magazine tube extension on Remington shotguns was a simple process that involved swapping out springs and screwing on the extension. Multiple screw holes in the mounting plates provide compatibility with almost all types of hardware and recoil pads. The fixture is made of anodized aluminum with a matte red finish and measures 4" (10.2cm) long, 1½" (3.8cm) wide, 1-13⁄16" (4.6cm) high.