Instead of purchasing Danish oil from the market, you can make Danish oil of your own by mixing finishing oil, varnish, and thinner in equal parts.

You can paint over danish oil with any oil-based paint once the danish oil layer is completely cured. Therefore, even though you can apply Danish oil with a rag, I recommended using a brush to better finish with the initial coat. Polyurethane makes the Danish oil coat more durable and makes it useful especially for outdoor environments.

I have heard also that the remedy is not to flood the surface but to use a rag and wipe away any excess. Build successive layers up. Congrats folks! Now you have a clear idea about what is Danish oil and how it works and its benefits as a wood finish. Does Danish Oil Protect From UV? This will work on most woods but if you are planning on treating external Oak, Pure Tung Oil is a better product. For the best finish, applying three coats of Danish Oil is typically recommended. Did I cover all you wanted to know about Danish Oil Finish? In this blog, we will discuss the benefits of applying Danish Oil to oak, what it looks like when it is applied, and other uses. Benefits of Using Danish Oil on Oak

IMO, applying Danish oil will not make your worktop shine as varnish does, but it will obviously enhance its natural look while keeping it looking gorgeous for longer without warping. Once clean, leave the oak to dry, then sand it with another Sanding Pad (but this time, without the Wood Cleaner). The second sanding will remove any original finishes applied to the wood such as an oil, wax or varnish. If oak is being oiled it is a good idea to sand it with sandpaper that is no finer than 150 grit. The reason for this is that the pores of the wood are more open thus allowing the oil to sink into the wood better. Better absorption equals greater protection.

Brush it on

The reason Danish oil is so effective is that it’s made by combining small particles that undergo polymerization to form a strong surface after drying.