As well as the options provided below, you can choose to restrict or block cookies through your browser settings at any time.

These decking supports require the installer to manually add or remove shims, usually of 2mm intervals, until the desired height is achieved. Raise the level of your deck quickly and easily, while also preventing rot with our robust Adjustable Pedestal Supports. Decking supports in this comprehensive range are manually adjustable with shims or manually adjusted with threaded sections of the support. Incredibly versatile, elevates subframe without the use of posts or concrete and ensures perfect level.Adjustable levelling joist cradles are best suited to areas with limited height where joists need to be supported; We see this tends to occur on roof terraces and Balconies. Choose Arnold Laver for all your timber needs and experience the difference that comes from working with a trusted and knowledgeable partner.

They are designed for use with standard 2" (44 to 48mm) wide joists, keeping them above the roof deck or base substrate and, importantly for exterior applications, above the drainage level of the roof or base. Decided to use these adjustable levelling feet as the thought of packing the joists out filled me with dread. Decking supports from Harmer, Wallbarn and Eurodec are used for supporting and level timber decking, paving and other timber products. Decking supports that operate with threaded sections mean the installer needs to twist the section up or down to add or remove height. Charges may be added for shipments to the Highlands, Isle of Man, Northern Ireland and Channel Islands, these will be shown at time of purchase.Effectively raises beams above the substrate surface, preventing saturation and reducing potential for rotting. I was right, once put together and using an extra spacer or two if required (I was building over a wonky old Patio) they were simplicity itself to adjust to the right height and maintain the correct fall across the deck. The StrataRise Multi-Level Cradle permits easy attachment to the joist after initial levelling is completed. A fast and straightforward way to create a level deck frame with even weight distribution, the raised joist system also provides practical space beneath the deck structure which can be used for neatly concealing pipework, cables and drainage services.

really easy to use and saved so much time as you could re-adjust as the joists we’re screwed together. There is a provision for fixing the cradle to the joist after adjustment, if desired, to allow lifting of the joists to insert interim supports, etc, without losing the cradle position and level. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. Raising the substructure above ground level, the Adjustable Pedestal Supports effortlessly lift the joists into the required position.A new, clip-in, moulded acoustic base pad, supplied as standard with every cradle, provides cushioning and protection when used on top of membranes – it incorporates water drainage channels. Can be used in gardens, landscapes, roof terraces, balconies, podiums around swimming pools, temporary floors in marquees, communal areas, and on grounds where there is a gradient. The height range can be increased by using one or more, optional, clip in, 3/4" (20mm) high extensions. The unique design enables the soft sprung feel of a timber floor to be achieved over concrete sub bases.

An additional advantage is that the shed base is raised above the ground level thus improving ventilation and helping to prevent damp and wood rot. This can be avoided by using support wedges or jacks to reduce the weight at corners until the required distribution of cradle supports are in place and adjusted. Large deliveries will be made to the address stated and/or at the drivers discretion to the nearest place of safe dismount.The two seperate components that make up the SDE system can be adjusted to suit a range of joist widths between 60mm to 120mm. Deliveries are sent using fully tracked next day services, in most cases, for UK Mainland addresses. The SDE hanger gives great flexibility to the user as it can be very quickly and easily fitted onto any size timber within the size limitations.