With the correct tools it’s quite straight forward to sharpen your snowboard edges at home. If you’re not confident or don’t have the tools, take your board to a store or rental shop. It’s once again that time of year, and my heart is overflowing with happiness. I had been waiting a very long time for this moment of adventure. Yes, I went hiking as often as I could this summer; I can’t really complain about that. But what about fun on the slopes, though? Use the iron to remove any dirt or grit that makes its way onto your board, then use the scraper to remove excess old wax or polish and get rid of any remaining debris. After that comes base cleaning: take some warm water and a little bit of soap to clean off your base so it will have maximum grip when you’re out on the slopes. It may seem like a simple tool, and it is, but that doesn’t mean that it’s any less valuable than a tool that gives you more than one function. While this is primarily a safety tool, it’s still viable in other situations on the mountain as well. I love multi-function gear. And it’s pretty cool everything they’re incorporating into outdoors belts these days. 686, with their emphasis on style and function, has created a tool that keeps your pants up and tightens your bindings. The 686 Original Snow Tool Belt has a #2 Phillips and flathead bit, 8mm, 10mm and 11mm wrench loops, and, of course, a bottle opener. No this shouldn’t be your only tool. But it’s great for a day cruising inbounds when you forget to grab a tool and don’t want to go searching for that tool-bench with most of the drivers stolen off it anyway.

In fact, you are far better off mounting your own bindings because you'll be able to adjust and fine tune them: It’s crucial to take your kit’s size into account. The Demon Complete Snowboard Tuning Wax Kit, for example, comes with a huge assortment of waxes, accessories, and sharpening tools. Your conversion disc should feature two holes which will line up with the ICS channel on the snowboard. Line these two holes up with the two channel inserts on the board Once it has finalised the length of board it will suggest boards that suit your ability and style of riding. For example, a beginner will want a soft all-mountain board. Whereas an advanced free rider will want a stiffer, directional board.The multi-tool also gives you 2mm, 3mm, and 4mm Hex bits for a more specialized use that can come in handy in certain situations. The #3 Pozidrive bit is also specialized, but it will surely pay off when you need it. Riders who are taller/heavier should choose a longer snowboard, riders who are shorter/lighter should choose a shorter snowboard.

If you plan on waxing your snowboard too, you might consider buying an all in one wax and sharpen tuning kit such as this one. Once you’ve finished sharpening the snowboard edge, use a stone to gently rub along the base edge and the side edge. This will scrub out any imperfections left by the tool. Final Thoughts on How to Sharpen Snowboard Edges The Dakine Torque Driver is another fantastic tool that gives you the ability to adjust your bindings or anything else that needs a little bit of tweaking when you ride. Thanks to a torque-style design that fits easily into your hand, it’s very convenient to use. A good rule of thumb is that a board should come up to somewhere between your chin and your nose, but this calculator takes it further… Stance Width - The rear window in the footbed of the binding allows you to see the reference stance locations printed onto the snowboard. Line this up with the distance you want to set the stance width

You may also like...

The starting point for working out what size board you need it your height and weight. Starting with your height this calculator works out whether you are heavier or lighter than average for your height. If you are heavier it will add a cm or two and if your are lighter is will remove a cm or two. Pop the channel insert out of the end of the ICS channel in your snowboard. Keep this safe as you will be replacing it later Next is your ability. If you are a beginner it will recommend a shorter length. If you are intermediate or above it will ask what kind of riding you are into. If you are mainly a freestyle rider it will recommend a shorter board that is easier to throw around. If you are into free riding and power it will recommend a longer board that floats up more in the snow.

Sure, it’s great to have options. But like 90% of the time a good old-fashioned Phillips head is all you need, and Union has you covered with their #3 screwdriver. This screwdriver works for all the screws Union uses, which let’s be honest given Union’s domination that’ll work for seemingly almost everybody these days. DEMON UNITED’s Ski and Snowboard Tuning Kit is an all-in-one solution for a messy snowboard. The kit includes an iron, plastic scraper, base cleaning, base ironing wax, edge tuning wax, and file—everything you need to keep your board looking good until next season. Do not use an electric screwdriver or drill to tighten your bindings as this can damage the bolts, bindings or board Insert the remaining 3 bolts and washers (if included) on each binding and tighten them a few turns at a time, moving in a diagonal pattern to ensure an even and level mount. This also reduces the chances of threading a bolt or insertUsing the marks on the disc and baseplate set the stance angles to your desired setting. Most bindings adjust in 3 degree increments This wax kit is the perfect solution to keep your snowboard and ski edges sharp and clean. The kit includes a variety of angle tools in various styles, three diamond stones, a gummy stone, and a neat carrying case. There are various kits for various types of boards (such as alpine vs. freeride), but the majority include everything you need for basic maintenance, including cleaning, filing edges, and applying base wax, as well as a few extras like graphite powder or glide oil that reduces friction from skating on ice.