Suitable for mild steel, stainless steel, plastic, cast iron, aluminium, bronze, copper, tin & plexiglas.

68 mm Hole Saws | Drilling | Screwfix

Regardless of the material or surface you’re working on, never try to force the drill bit through any faster than it wants to go But it's not just about longevity. The Turbo Tough TCT hole saws are also designed to enhance your drilling experience. Featuring a convenient spring-loaded centre pilot drill, these hole saws effortlessly locate the hole and efficiently eject the core of material after each cut. Say goodbye to time-consuming manual core removal and experience the effortless precision of our innovative design. Ensure you cut directly down into the workpiece at an accurate perpendicular (90-degree) angle to the surface Crafted with premium grade solid tungsten carbide tips, our hole saws are built to withstand the toughest drilling tasks with ease. The superior strength and durability provided make them the go-to choice for professionals who demand the very best from their tools. As a minimum, this should always include suitable goggles or glasses, an appropriate dust mask for the material being cut, and good quality work gloves

Back in stock alert

They will generally extend anywhere from 10-30mm out beyond the open cutting end of the hole saw, and may also incorporate an ejector spring mechanism for helping to jettison plugs of loose material build-up There are different types of hole saws and they generally range in size between 14mm and 210mm in diameter. Holes below this size can usually be achieved using a standard drill bit, while larger holes will generally require alternative cutting methods. This is due to the width of the hole cutter bit, and the subsequently large amount of material being removed

Holesaw Kit | Toolstation Downlight Holesaw Kit | Toolstation

Upgrade your drilling arsenal today with Turbo Tough TCT Hole Saws and experience the exceptional quality, durability, and performance that professionals trust. Don't settle for anything less than the best. Cordless models can get the job done on thinner or softer materials, but you’ll require at least a 14V model Be aware that going in at a slightly off-centre angle - or hitting a nail while drilling - can cause very sudden and violent binding/jamming of the drill when using a hole saw Introducing JEI Solutions Turbo Tough Tungsten Carbide Hole Saws - the ultimate choice for professionals seeking exceptional performance and longevity in their drilling tools. With an impressive 10X more life compared to traditional bi-metal hole saws, these cutting-edge tools are engineered to outlast and outperform, giving you unparalleled value for your investment.

Sign up for special offer emails

You should never attempt to bore holes through masonry or heavier timber (anything over about 50mm) with a battery-operated drill If you want to drill a hole clean through a workpiece, be aware that going directly from one side through to the other with a hole saw can create a lot of ‘blowout’ (material tearing) on the reverse side