Adjusted programmer & thermostat so that there was no heat demend, changed programmer time to come on in 5 minutes, turned Digistat up to 23C and waited. Constructed with high-quality materials, the Drayton Digistat+1 is built to last and withstand everyday use. Its reliable performance ensures that the desired temperature is consistently maintained, providing comfort and convenience for the users. These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

Drayton Digistat+ RF601N RF thermostat and single channel

To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers?

The RF1, 2 and 3 are no longer available. They can be replaced with any current range of RF thermostats. Hard Wired Room Thermostats The Drayton Digistat+1 can be wired directly to the heating system, providing accurate temperature control and minimizing temperature fluctuations. It is compatible with various heating systems, including gas, oil, and electric boilers, making it suitable for a wide range of installations. This range of valves and actuators are now obsolete. Your only option is to drain down the system and fit ZA 5/6 zone valve. day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. Typically 30M, however building construction and materials may effect this. Signal strength test should be carried out.

Digistat+C RF | Drayton Controls Digistat+C RF | Drayton Controls

The actuator head of a ACL Lifestyle 2-port motorised valve (679H308-30L1) has failed. Is it still possible to get the actuator for this valve to avoid draining the whole system?

Digistat+2Si

The TRV is liquid filled this gives a fast response to temperature and provides a greater temperature accuracy. The thermostat also offers various advanced features, such as a frost protection mode, which prevents pipes from freezing during cold weather. Additionally, it has a vacation mode that allows users to set a temporary temperature reduction when they are away, helping to save energy and reduce heating bills. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical?

QUICK RF COMMISSIONING GUIDE - Drayton Controls

The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body. These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVs The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation.

Thermostat (British Gas WR1 receiver/ Drayton Digistat)

The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. Turned mains supply off (& verified), removed WR1 (SCR) unit from the wall managed to prise the clips holding it together apart (without breaking any) de-soldered the old cap and re-soldered the new. There are also known issues when pairing with Samsung smartphones using Android 11. Please change to an earlier or later version of Android. There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly.