The Lay-Z-Spa Bali has a built-in AirJet™ massage system which delivers an incredibly rejuvenating hot tub experience. At the touch of a button, the 81 all-encompassing AirJets will come to life so you can unwind and relax. (*81 AirJet™ for models pre-2021) 40°C Rapid Heating System It is not recommended that you use pre-2021 Lay-Z-Spa hot tubs when the temperature drops to 4°C. This does not stop you from doing so as long as you follow appropriate setting up, care and maintenance*. One thing you rarely hear mentioned is TDS (Total Dissolved Solids), this includes everything from chemicals to organic matter from bathers. If you are gradually finding it harder to achieve a good water balance then TDS is likely to be the reason.

This is a perfectly normal function. The pump unit heats the water to a couple of degrees higher than the temperature that you set. It will then stop heating the water and monitor the temperature until it has dropped to a few degrees lower than the temperature that you set.The main issue is not the actual hot tub but the pump. If water should freeze in any part of the heating system you will, without a doubt, be unable to use it again. Regardless of heating or not, we recommend that your filter is running for at least 8 hours a day to keep the water clean. Note: Ensure you have all of the stop-caps and the hose pipe adapter (supplied with your lay-z-spa) at the ready. Step 1 The main issue with using a hot tub during the winter months is that they are not designed to be used or stored in less than 4 degrees centigrade (40f). Here in the UK, temperatures drop far below that during winter and spring, making it unlikely that you are able to enjoy your hot tub. There are a few key hot tub brands out there but a wide range of styles, types and sizes. Before you buy it’s important to consider which would work best for you, and your garden. This includes asking whether you’d need/prefer:

If you’ve kept your Lay-Z-Spa clean throughout the season, you should easily be able to wipe away any residue using warm water and a soft cloth or sponge. (If there are stubborn dirt marks, squirt a little hand soap on the spot. A very mild dishwashing liquid might also work). Step 6. Completely Dry the Hot Tub Whenever the Lay-Z-Spa's heater is turned on, the filtration function is automatically activated. If you wish, it is possible to activate the filter on its own, to keep the water circulating but not heating. Rinse well, (avoid using any cleaning chemicals for the main unit as this may eat away at the material). Place the stoppers caps inside the spa and disconnect the pump unit. Allow time for the pump unit to cool down before connecting again.This energy‑efficient inflatable hot tub has Wi-Fi connectivity that allows you to control your hot tub from the Lay-Z-Spa app so it's always ready when you are.

Remove the pump from the spa liner by placing the stopper caps within the spa over the debris screens.Make sure you have the right chemicals for water treatment. Some of the products that you need to keep the water clean and fresh include: Despite its thinner walls, this tub feels sturdy, and the wood-effect print on the exterior – inspired by traditional Scandinavian wooden hot tubs – puts it a cut above the average inflatable tub in the looks department. Not to mention, it can heat, massage and filter all at the same time, with the powerful integrated air jet system offering a welcome jacuzzi experience. Bliss! This is also an outdoor spa you can use all year round thanks to its 'FreezeShield' technology.

Once drained, take out any fixtures and fittings still attached and place them to one side for cleaning. (clean with soapy water and then dry completely with a soft cloth). Step 5. Thoroughly Clean and Rinse If you're looking for an affordable hot tub, then the Lay-Z-Spa Cancun is generally one of the cheapest hot tubs on the market, and has some pretty impressive features to boot.

Already Own a Hot Tub?

Knowing how to drain a lazy spa is one thing, but knowing when to drain is even more important. A build-up of body oils, soap, rainwater, and other contaminants can make the water dirty. In some cases, this can even become a health hazard. Draining your Lay-Z-Spa is part of regular maintenance. Try to keep the water balanced at all times and use the hot tub cover when nobody is using it to help keep it clean. Please note: The table is only applicable to ClearWater Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on exact amount of water in your spa, water type, water temperature, positioning of spa etc. Therefore it is essential to test the water every time before you use it. Remove the filter housing and place the larger cap in its place. (This will stop the water from draining while you carry out the next 2 steps). Step 3 If you use your Lay-Z-Spa regularly, say 3 or more times per week, keeping your heater activated and set to the temperature you like is the most cost-effective way of running your hot tub and will save energy in the long run.