When the wireless sensor set up different channels, the weather station "REMOTE SENSOR" also want to switch to the same channel. When there is no wireless sensor signal transmission on the channel, "--" will be displayed in the channel of the weather station Indoor comfort level is calculated according to the indoor temperature and humidity, a total of 5 levels. The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are shown in the LCD display.

Press " " button to confirm your setting, the Month display starts to flash. Now use "▲" and "▼" buttons to set the correct month.For the extra pounds you pay, you get a professional weather sensor that combines technology that allows it to read not only temperature and humidity at a higher degree of accuracy, but also other factors such as the wind direction and speed, and the amount of rainfall. It offers heat index and dew point readings. It’s fascinating to have these insights into the environment around me. Setting it up was easy. I just placed the indoor unit in a central spot and mounted the outdoor sensor in a sheltered area. They connected automatically, so I didn’t need to be a tech whiz to get it up and running.

The display base station features a large LCD screen, it can be conveniently placed on a table in any room, and easy to monitor the weather conditions. The information areas are separated and well organised in different ways, and the data can be easily seen from different angles.

More Manuals From Kalawen

With the help of slow power, your task will become easier over time. It doesn’t require much maintenance or frequent battery replacement either. At the same time, the cost of the weather station also doesn’t vary much on this factor. Another way to look at the accuracy of a weather station would be to observe how frequently it’s changing the results. Some of the top-notch devices even tell you accurate readings after every two minutes. 3. Range Press " " button to confirm your setting, the Date display starts to flash. Now use "▲" and "▼" buttons to set the correct date. Its screen is also loaded with intriguing features. For instance, you get dual alarms for convenience. Also, the screen brightness controller and graphic displays make the measurement a child’s play to read.

When the temperature of REMOTE SENSOR is –1°C to + 3°C or +30°F to + 37°F, the frost alarm will be activated, symbol flashing. Press to confirm your setting, the Minute displays starts to flash. Now use “ ” and “ ” buttons to set the correct minute.The icon of Upper limit of the Temperature alarm starts to flash. Use the “ ” and “ ” buttons to set the required maximum temperature. Press to confirm your setting. One of the adorable features the weather station provides you is long-range. You can easily mount it on any pole within 492ft of distance. At the same time, the whole mounting and setup process doesn’t require much hassle either.