Step 3, choose your font, browse throught the various font categories by selecting the different tabs. Dave Moore of this parish, very good and not over expensive. The only problem is he is based in the West Midlands, and I am not sure how far he will travel. You can have dropped shadows in vinyl too, in any font style & almost any colour. In the end I only ever did vinyl lettering on anything, no point in painting any more, and when done badly they look awful and ruin the finish of any boat, as it will be the first thing you will see every time you look at it.

Our Scallop Stencil was recently Featured in Ideal Home Magazine!! See listing images for the feature.... Step 4 - is where you choose your name colour, shadows and outlines. You can also choose a combinations of shadow, outline or both. To move the shadow position, use the 8 position box on the right hand side.You can select various arch shapes, wave, bulge top and other special effects.How does one name his or her boat? Choosing the right name for a boat sign leaves many nautical thrill seekers nervous that they won't be able to settle on the appropriate one. There are various opinions when it comes to the subject, but getting the name right can often be the difference between proudly navigating the waters and floating with a name that not only the owner but, the passengers as well are embarrassed about. How to name you boat article. Nightwatch has painted names. This was done prior to our ownership about 14-15 years ago. As we are very 'houseproud' we have washed the boat a number of times and even polished the boat at least four times during this tenure. The signwriting is starting to wear through, not dramatically, but if you look carefully the evidence is there. If you need help with a more complicated or custom design or a custom font then please get in touch. If you have an EPS, PDF or other vector file then we may be able to use this. We can also pre-layout and space your decals on two lines (subject to approval) Unlike most companies, we pre-layer our graphics so you do not have to struggle to align two or more layers. I have just painted my Boat - how long before I can fit them?

Remember when you are painting onto a gelcoat finish, it will need to be on a keyed surface otherwise it will flake off after a short while. Also the paint may react with the gelcoat finish too. Also painted names usually come off way sooner than vinyl. But if you do actually want to paint it, then you would need a china-graph pencil to draw the letters outlines and use car striping as the straight lines for the base of your letters, and straight edges. That doesn't bleed. If you can't draw the lettering with the china-graph pencil, believe me you won't be able to paint them!Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material Our Vinyl Boat Lettering / Cut vinyl graphics are supplied in Premium Grade 7 Year vinyl. We do not use Monomeric or other Low-Grade vinyls. Other factors that affect lifespan are UV exposure and the quality of the installation, cleaning the area of all wax and contaminents prior to fitting is crucial. Do I get instructions on how to fit my vinyl boat name?

Scroll design:

I have heard and certainly don't dispute this, Dave Moore is a very good, first class sign writer. But,I have also heard, that he is very busy, and as a result no doubt has a waiting time for his services.