If you are also looking to create some beautiful pieces of art, these are the right items for you to achieve the desired choice of shade and look. If you're looking for a putty or paste that you could use in this way then you'd probably be best making something like this by chopping up some woven glass into short strands and then mixing this (at a high percentage) into some of the coupling coat. It can be used to remake profiles or replacement pieces for furniture or similar and is notable for its ability to take tacks and to hold them without fracturing. years of providing quality repair products ensures that you can do the job correctly the first time.

The Base and Curing Agent components shall be thoroughly mixed together using a stiff spatula or a slow speed drill with paddle attachment until a uniform grey mixture has been produced. Also known as laminating paste or putty, this easy to use epoxy mould paste is designed to be used in combination with our EG60 Epoxy Tooling Gelcoat to provide a very quick, clean method of making problem free moulds for carbon fibre and fibreglass lamination. Repairs made using Industrial Metal Rapid can be overwrapped with SylWrap HD, which will provided a rock hard, impact resistant layer over the epoxy paste.The amounts should be as close to equal as possible, but a slight excess of part A is preferable to an excess of part B. Hi Anton, if you're finding the past too thick to disperse into your resin mix, it might be that you're storing or using it too cold. I used this filler to repair holes and cracks in my asphalt floor which were caused by carpet gripper rods.

In all cases, a ramped temperature post-cure is required before the component or mould can be used at elevated temperature. Being an epoxy based mould making system, EMP60 is ideally suited for use when making epoxy based end products (like carbon fibre parts or epoxy matrix GRP/FRP). PC-7® has a work time of 60 minutes so only mix as much product as you think you can apply in this time. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive.The below calculator can be used to determine the quantity of Industrial Metal needed to repair a damaged section of pipework. If you start to add significantly more resin to the pigment paste then you'll be getting into a territory where you do need to allow for the extra resin in the pigment. EMP160 can be used on its own or can be used to fill in corners or detailed sections on larger or more complex moulds before the main reinforcement is added. Data Sheets Download the Loctite EA 9394 AERO technical data sheet (TDS) and the Loctite EA 9394 AERO safety data sheet (SDS) from Silmid today.

Whilst application and installation of most of our coating and waterproofing products is relatively easy, we recommend that you speak with our technical team to ensure you follow the correct application in line with the datasheets. Our team are also artists, so we have experience using our items first-hand; we’ve put them to the test time and time again for wall art, jewellery and timber table creations. Choose PC-7® if you want to: seal a crack in a wall, attach a hanger to a ceramic plaque, seal a leak in an oil pan, repair a granite monument, fix a leak in PVC pipe connection, create a multimedia sculpture, and thousands of other repairs. Pigment has already been added to the basecoat resin at 10% which is at the upper end of how much pigment can be added to a resin but if you wanted to experiment with making increasing the intensity of the pigment further then you could try adding up to a maximum of an additional 5% by weight of this pigment to the basecoat. So we would recommend contacting your resin manufacturer if you have any doubt, or simply conduct a small curing test before using the pigment on your main project.

In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. Repairs made using Industrial Metal can be overwrapped with SylWrap HD, which will provided a rock hard, impact resistant layer over the epoxy paste.

The uncured materials should not come into contact with the skin: the wearing of impervious gloves of rubber or plastic along with eye protection is necessary.

Across our range we have epoxies with different consistencies and strengths, targeted at different types of repair project. When using EMP160 paste, moulds are usually made by hand-layup using one or two layers of EG160 gelcoat reinforced using EMP160 paste. All you need to do is ensure that when you make the mould, your flanges are big enough to give you room to lay up the bagging stack and have somewhere for the resin feed and vacuum outlet to be positioned. Remove contaminants such as dust, dirt, oil, barnacles and grime with a solvent such as methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out.