Then, use the jig to measure the distance required between your handle holes and set the hole spacers. Suitable for square corner 102 / 76mm hinges and eclipse radius corner hinges with quick, easy and accurate set-up. In this article learn the differences between a domino joiner vs biscuit joiner and what’s best for your projects. While biscuit joiners have been around for decades it is only recently that the Festool DOMINO has become “the” tool to own for loose tenon joinery.

If your DIY skills are stretched to the max with measuring and drilling, a cabinet knob jig template might be best for you. The number settings relate to the distance from the edge of the door to the centre of the hinge hole. A Forstner bit (required to drill a flat-bottomed hole) is held within a guide block, so once again only the cabinet is drilled.

The Kreg cabinet door hinge jig costs a little more than some competitors but is quick and easy to use, well-made, and produces consistently accurate results. While this jig isn’t all-metal and lacks a hard-sided carrying case, it is the same basic intuitive design as the TPT models. Most door hinge jigs need to be reset for each hinge, but the Trend can be set to cut two or three hinges at the same time. Some ½-inch routers include a ¼-inch collet as an option, whereas ¼-inch routers cannot use ½-inch bits. From cabinets to passage doors the best hinge jigs will allow for a fast and accurate installation of concealed hinges, hidden hinges and even full sized doors.

The two are actually quite different, so we’ll explain their technical aspects before offering suggestions for what we believe are the best door hinge jigs currently available.Plastic jigs with pre-drilled holes and no adjustment might not allow you to precisely center the holes on your workpiece. Hinge jigs are a must for even a door or two to prevent alignment issues common to free-hand approaches. Cabinet hinge jigs almost always include the Forstner bit required to drill the flat-bottomed hole for the main body of the hinge.