Monitors radio traffic on a trunked system to find unknown ID and automatically records audio from and logs new channels for later review.

I see other frequencies in the log with different color codes and seems to be using Motorola RAS as there is major CRC errors. I do not know if UBCD3600 could handle that now or if it needs a future upgrade to handle it. It could also be a very weak signal you are scanning. You can program each of your Favorites Lists with a Startup Key (0...9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan. With a GPS receiver, for precise system selection and continuing reselection when you travel. The scanner can automatically avoid and unavoid Systems and Departments based on your current location.Control Channel Only Scanning – With Motorola trunking frequencies, you do not have to program voice channel frequencies.

To receive civilian aircraft transmissions you will need a scanner that has a frequency range of 108-137Mhz. If you want to listen to military aircraft transmissions then you will need a scanner that has a frequency range of 225-400MHz. You should also set the scanner to the AM mode (Amplitude Modulation).

Contents

Intermediate Frequency Exchange – Changes the IF used for a selected channel/frequency to help avoid image and other mixer-product interference on a frequency. You can program the scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors (white, blue, red, yellow, magenta, green, cyan), and 2 flash patterns. When using a scanner you can either use the 'Search' mode where it searches through a range of frequencies until it stops when it finds a transmission for you to listen to, or use the 'Scan' mode where you store specific frequencies into the scanner and it will just scan through these frequencies until it finds a transmission.

I use DSD+ to decode the control channel data to see what channel numbers it sends the calls to and then try and find that voice channels frequency by using another analog scanner to listen which frequency gets active with DMR signalling, and enter the channel number divided by 2 in the scanner. I've read that it only does either a Service Search or (what sounds like 1 only) Limit Search. Is it possible to setup multiple limit search ranges as with custom search on the Uniden? Or maybe you can edit the Service Searches? PC Programming – Use the Sentinel software to manage your scanners Profiles, Favorites Lists, and firmware updates.Multi-Level Display and Keypad light – Makes the display and keypad easy to see in dim light with three light levels. Radioreference conventional and trunk system imports thru Sentinel (Radioreference import requires an additional subscription and is

I guess the other option is to look for a 2nd hand 3500XLT, or as you say the 125XLT. I haven't really looked at one of those before... Adjustable Scan/Search Delay/Resume – Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search. Butel ARC536 basic software for Uniden UBCD3600XLT, BCD436HP, BCD536HP, Digital scanner receiver. ARC536 is the best-selling software for Uniden flagship scanners and it allows users to expand the functionality of their UBCD3600XLT scanner. It also includes the most versatile and feature-rich editor available on the market. This Version 2 software is compatible with Windows 7/8/10/XP/2000 and Vista. This software's features include the following: BCT15, BCT15X, UBC800XLT, UBC3500XLT, BR330T, UBR330T, BCD996T, BCD996XT, BCD996P2, BCD396T, BCD396XT The Uniden Bearcat UBC3500XLT was probably one of the best airband hand-held scanners, but it has now been discontinued, although it can of course still be found on the second-hand market.Searches a range of frequencies to find unknown radio traffic and automatically records audio from and logs new channels for later review. For example if you're a mil airband listener you can setup a group profile to include you favourote airfields, control frequencies, JTAC etc. When you want to Lets you set how far out from your current location the scanner will search for channels in Favorites Lists.