If you are thinking of purchasing a laser level the key question you need to ask yourself is what projects you need to use your laser line for. We hope this blog post may have helped.

As an industry-standard rule of thumb, you should be aiming for a ratio of 1:80. If your patio runs for 6m from the house, divide that 6m by 80, giving you 7.5cm – and that should be the difference in height between the top and bottom of your patio. Not enough to tip your drink over, but enough for rain to flow away. Laser detectors work by producing a short beep when you are close to being level, transitioning to a solid beep when you’re at level. Some Imex detectors can also display a reading in millimetres as to how far from level you are. Stand the bottom of your staff at the point you identified and move the detector up and down the staff until it indicates that you’re level with the laser. This will usually be a solid beep. Secure your detector at this height. Some items are shipped directly by the manufacturer. In this case, the courier depends on manufacturer’s selection. Please see the below table for specialist direct from supplier delivery services.

Cookie Notice

Identify a point in the top corner of the patio, by the house, which is at the desired height – this should be below the damp proof course, allowing for a sensible step down from the house

Scottish Islands: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3 Imex lasers are manufactured with high quality diodes that are able to project beams with minimal deviation over long distances. They are also built to last, with the latest range of Imex rotary laser levels featuring a 5 year warranty when registered. Imex have worked closely with contractors and are becoming the laser of choice for drylining, suspended ceiling, tiling and kitchen fitting trades. This quality manufacturer also continues to improve productivity by continually innovating and exploring the latest laser technology; demonstrated by products such as their 360 degree, multi line laser, capable of projecting 3 beams on different axis simultaneously. Having identified the type of laser level you need the next step is to look at the features to ensure your choice does not let you down on the job. Imex E60 Rotating Laser These steps are to help create the level foundation for your patio. If the foundations are level, the paving slabs should be level. This EL60 MK11 Imex Digital Level has a self calibration function feature so that you can be sure of perfect levelling. If you ever drop the tool or are concerned about the accuracy then you can follow the simple instructions to re calibrate. You do not need a level surface to do this, just a flat one.

Tool Repair Service

Self-levelling lasers will save you a considerable amount of time if you are going to be using your tool regularly in comparison to having to do it manually. This feature comes standard across the Imex range and configures automatically upon powering up the device. The E60 Rotary Laser level has been designed to suit the needs of any DIY, horizontal only, levelling task. Benefit from the same range as our professional rotary laser models and the convenience of a compact all-in-one kit and carry case. The E60 is the perfect low cost levelling solution. Features: These types of lasers not only improve efficiencies but also help reduce the risk of miscalculations that can lose valuable time and money further down the line of a building project. For a patio project, we recommend using your laser level in conjunction with a detector, with red and green lasers working equally well. Always looks for a self-levelling laser.

We’re aiming for a “flat” patio with no steps or steep gradient, just the fall needed for drainage, which you have already calculated (see above) Two of the most common questions we get asked are: what type of laser level do I need, and which model should I buy? Get it right and your laser level will become an essential item in your tool kit providing you with consistency, convenience, and accuracy time and time again. When choosing a laser level consider the size of the areas you will be levelling. Internally, it is likely to be a rarity that you will have a project that needs to measure greater than 30 metres, so a laser level with an accuracy of +/-2mm is a good level of accuracy within the market. However, for most people, you will be trying to create something as level as possible – with one major consideration – drainage. In fact, what you should probably be working towards is a very gentle slope away from your house to avoid rainwater puddling or flowing towards your home and causing a damp problem.Scottish Highlands: AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50 Damage rendered due to an accident, act of God, exposure to any other event or condition for which the product was not intended, including but not limited to fire, water, environmental hazards, atmospheric conditions, solar activity