Fan 2: 16.6 ~ 51.17 CFM - 28.71 ~ 114.89 m³/h Connector 4-pin PWM Static Pressure Fan1: 0.44 ~ 9.41 Pa / 0.045 ~ 0.96 mmH²O

wNotyarD How to show phone screen on TV or bigger screen while the phone has to use device network to control the device? ( 1) In my previous post, most people recommended the Fuma 2. After doing some research I’ve found that these two Scythe coolers are my best options in terms of price to performance. Performance-wise, they are fairly similar. Fuma has slightly better performance. Mugen has better noise levels. Mugen is cheaper. Fan 1: 120 mm Kaze Flex PWM (2.7 - 23.9 dB (A), 300 - 1,200 rpm, 14.06 - 57.52 m³ / h) (8.27 - 33.85 CFM), 0.23 - 0.9 mmH2O Prior to testing at each TDP level, I would run AIDA64 CPU & FPU Stability test for one hour to soak the room with the heat generated from the CPU to ensure consistency in results. Acoustics

Recently Viewed Products

showcasing critical qualitative and performance metrics. Performance metrics are further segmented into distinct There’s more to a cooler than just it’s heat sink. The fans included have a huge impact on cooling performance and noise levels. Included with the FUMA 2 are the Kaze Flex 120 PWM and the Kaze Flex 120 Slim PWM fans. Fan 1

So, even though the Fuma 2 did not cool as well as it could have, that extra four degrees in the tank hurt them a bit, but all around, we have very little reason not to recommend you buy this cooler, no matter what the motherboard is, no matter your memory arrangement, the Fuma 2 is here ready and willing for you to give it a chance! Intel LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD AM4, AM3, AM2, FM1, FM2 * graphs while leveraging the AMD Ryzen 7 5800X, illustrating how each cooler performs under various varying CPU power levels. This allows for a clear comparison of their The first tests were done with a TDP enforced at a 100w limit, because most consumers considering this cooler will likely be using a mid-range CPU like the Ryzen 5 3600x. Both coolers performed on par with each other – with the FUMA 2 winning some tests by a small margin, and the NH-U12S winning other tests by a small margin. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.uk

CPU Cooler Specification

Even though the FUMA 2 Rev.B didn't top the charts, it offers a great mix of many things. Good thermal results, better than average noise levels, low cost, and ease of use all come together to make a serious bid for your dollars. Pros Intel LGA2066, LGA775, LGA115x, LGA1366, LGA2011 / 2011-v3 - AMD AM4, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ * Considering the 207 had the pleasure of taking air from a matched pair of 25mm fans, it is easy to see where the thermal advantage comes from, but all things considered, we feel that the Scythe FUMA 2 Rev.B is the obvious choice of the two. To top it all off, they are nearly identical in cost, so it's down to big and bulky, or big, but pleasant, you make the call. Fan 2: 120 mm Kaze Flex PWM (4.0 - 24.9 dB (A), 300 - 1200 rpm, 28.2 - 86.93 m³ / h) (16.59 - 51.16 CFM) , 0.076 - 1.05 mmH2O