The software, tpMiFi, is simple but effective. You can manage everything with the app and set it up just as you like it. WPA-PSK: This uses the original version of the WPA protocol (essentially WPA1). It has been superseded by WPA2 and isn’t secure. The only thing you need to do is to buy a local SIM Card with data only and get it activated via a phone (most of the time the people who sell you the SIM Card will activate it for you), place the card in the TP-Link M7200 and turn it on! Within a minute you will see your own WiFi network. This is a must if you ask me if you enjoy traveling. Specifications Maybe you bought a 3G Simcard, you can set it to 3G Only. Now it will not connect to a 4G network, even if it is available. With the tpMiFi App, you can conveniently access and manage the Mobile Wi-Fi right on your iOS/Android devices. The tpMiFi app allows you to set data limits, control Wi-Fi access and send messages.

WPA2-PSK: This is the most secure option. It uses WPA2, the latest Wi-Fi encryption standard, and the latest AES encryption protocol. You should be using this option.

FAQs

What should I do if PIN is required when I first connect to Mobile WiFi’s wireless network? 01-16-2018 156110 If the Battery LED blinks red when the battery level is enough or when charging, make sure the device is being used within 0-35°C and the battery is inserted.

To avoid wireless disconnect issue during ISP file upgrade process, it's recommended to upload ISP file with wired connection unless there is no LAN/Ethernet port on your TP-Link device. FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)TDD-LTE B38/B40/B41 (2600/2300/2500MHz)3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz) Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)can be slow now, especially if we compare it to 4G. You can change the Network Mode on the TP-Link M7200. You can set it to 4G Preferred, 4G Only and 3G Only. Just make the connection with your smartphone, tablet or laptop and enjoy fast 4G internet. SIM Card Size Please verify the hardware version of your device for the firmware version. Wrong ISP file upgrade may damage your device and void the warranty. （Normally V1.x=V1） This is not the most complicated device out there. The usage is simple, but there are some features I want to point out. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.

For travelers, this is a must. Even if you are going for 3 weeks, you will need this and it is so easy to turn it on and book a tuk-tuk or Grab to your next stop. I’m going to take it with me everywhere I go now, this device made my travel much, much easier. Why does my TP-Link Mobile Wi-Fi device run out of battery quite fast and how to fix it? 04-22-2022 25854

Emulators

How to troubleshoot if there is no internet connection when using 4G Mobile Wi-Fi(Case 1) 06-28-2022 355842 With the 4G Preferred option, the TP-Link M7200 will connect to the best available network. This can be a 3G or 4G connection. WiFi Range If you want longer battery life, you can change the range of the WiFi coming from the TP-Link M7200. You can set it to Long, Medium and Short. Short gives you the best battery life. This might be a handy feature if you are using the TP-Link M7200 in a remote location where you do not have access to power. By setting the WiFi Range too short, you maximize the battery life. Software tpMiFi