To remove the unit, fully insert the removal keys into each slot on the left and right edges of the front panel. Carefully slide the radio from the sleeve. Dangerous Road/Dangerous Crossing: Stores location, direction of travel, and speed. If you are traveling at a speed greater than that specified, in the direction specified, and if you are within range of the set location, the scanner sounds an alert at 1, .5, and .1 miles/km from the point. These range distances are also automatic and fixed. CONNECTING YOUR SCANNER If you are unsure about how to install your scanner in your vehicle using the optional DIN-E sleeve, consult your automobile manufacturer, dealer, or a qualified installer. Before installing, confirm that your scanner fits in the desired mounting area and you have all the necessary materials to complete the task. Your scanner requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an additional 2-3/8 inch (60mm) space behind the unit for connectors and wires. Important: AVOID AIRBAG DEPLOYMENT ZONES.Ignoring this installation concern may result in bodily harm and the inability of the airbag to perform properly.

The Uniden BCD536HP is an excellent digital police scanner for novice and experienced users alike. It comes pre-programmed with access to over 10,000 frequencies in the U.S. and Canada. Simply turn on the unit, enter your zip code and the scanner automatically detects channels for police and fire departments, emergency medical services (EMS) and weather alerts within a 20- to 50-mile radius. information as digital subaudible data that accompanies each transmission. The frequencies also have to be in Are you a scanner pro who finds software and frequency lists unsophisticated? Then this is a very good scanner. You will be satisfied. With over 25,000 channels and dynamic memory, you’ll find a place in your amateur arsenal, and your heart, for the BCD996P2. Configurable Band Defaults– Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50, or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.Automatic Channel Setup– Accepts frequencies on any valid channel step, even if it does not fall within the band plan’s default steps. press Hold to hold on the channel or system. Press ● (or press and hold ● to view longer) to view the current system and Band Scope Mode– Band Scope mode is a special type of search mode where the scanner graphically displays the strength of any signal it finds.

A negative delay will force a resume after that number of seconds. This setting applies to all channels in theThe Uniden BCD996P2 is for experienced users of radio scanners and has a huge set of amazing features. While it doesn’t come with installed software, you can still find online resources to program it without too much difficulty. In addition, the number of satisfied customers only further boosts the appeal of this scanner. Custom Alerts– You can program your scanner to alert you when a channel is received, you receive a Close Call hit, a talkgroup ID is transmitted with an emergency alert, you get close to a POI (Point of Interest)/Dangerous Road/Dangerous Crossing, or you receive a Tone-Out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2 color patterns. It is important to keep in mind that the Uniden BCD996P2 is not designed for beginners. Like the BCD325P2, this device has a more advanced design that is best suited to experienced users. It doesn’t come with any software or frequencies. While it might not be the easiest scanner to use, it does have a fairly attractive modern design. Measuring 11 by 3.8 by 8.5 inches with a weight of 5.9 pounds, it doesn’t take up a ton of space. Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert. Programming is the #1 reason police scanners are returned and the root issue with 99.999% of any negative review you'll find.

Important! There are many options and settings in Search/Close Call Options that effect and compliment the settings Fire Tone-Out will now search and find your tones to program (dah). There are only 3 ' Search Keys' (vs. the 996T'sOn the front of the scanner, there are 3 knobs that produce different results depending on whether you rotate them or press them. Similar to the knobs, all the buttons can have a different action based on what mode you are using at the moment. The LCD screen and all the buttons have 7 color options and 3 different light levels, so you can use the scanner even in dim lighting. channel. Then see Edit Group Options and Edit Conventional Systems Options to customize the group and system.