It’s a two-stage process that involves leveling the wood surface and then polishing it. The second part of the process involves wet-sanding with ultra-fine sandpaper and polishing with a buffing.

Once you’ve applied a full coat of Lacquer, create a smooth finish by feathering the wet Lacquer with a flat brush. This is done by holding the brush at a 90° angle to the surface and very lightly brushing up and down. This will remove some of the larger brush marks, but is not essential to the finish.A coat of lacquer paint is the secret for creating this lustrous look, and the product is perfect for creating depth, interest, and extra light in a room; sunlight, candles, and lamps bounce beautifully off the shine. Designer Phillip Thomas created the room above, which was featured in the March issue of House Beautiful (see the full tour here), so he was the perfect person to explain how to figure out if the lacquered look is right for you. First, is lacquer actually what you want? Working within these prescribed parameters will assist you in obtaining your desired results without any issues stemming from high heat or moisture levels. Avoid over-brushing: Suitable for indoor and outdoor use, alkyd lacquer is virtually odourless and releases fewer VOCs than oil-based lacquer. Natural lacquers

Also, ensure you inspect the surface for any bumps once it has dried, then scuff sand it using ultra-fine 320- to 400-grit sandpaper. Ensure you repeat this step between each subsequent coat. Ensure that the top-notch paint you select is labeled as “self-priming” or “high-hide,” and diligently adhere to its usage instructions for ideal results! Lacquer is a separate layer that must be applied over the main base coat, while high gloss paint encompasses both the hue and glossy finish within one product. Just about any DIYer should be able to apply lacquer. However, if you want perfect results, you need to follow a few rules.While the cotton cloth will do the job, we recommend a power buffer for a completely mirror-like sheen.Using a power buffer instead of hand-buffing is also faster and more effective. After applying each paint layer, wait for it to dry entirely. The amount of time this takes can differ depending on the kind and brand of paint being used and your area’s environmental conditions. Generally, drying times range from 1-4 hours. Protect the surface: Following manufacturer instructions, apply it with a brush, roller, or spray gun and let it dry before coating your project in fresh paint. Use a self-priming paint: