Now shred the two sheets of paper or ‘sandwich’ into the shredder. Make sure that no oil spills out of the paper sandwich. If you notice that your shredder is not working as effectively as it usually would or it is making strange noises when you run it, that is a sign that it is likely getting clogged up, and you should apply some shredder oil. Q: Is shredder oil the same as sewing machine oil? A: The most common shredder oils include Solvent Refined Hydrotreated Middle Distillate, Commercial Oleic Acid, Butylated Hydroxy Toluene, Severely Hydrotreated Light Naphthenic Distillate, Canola oil, and some vegetable oil derivatives. You must never use commercial lubricants, like WD40, on a shredder because this can do a lot of damage. Also it is not recommended to use olive oil. This oil should not be put into a paper shred der . Putting olive oil in a paper shred der can damage the machine .

Prevention of the problem is better than finding a solution to the problem. So, to prevent your shredder’s blades from getting blunt, it is essential to perform regular maintenance on your shredder by oiling the shredder and by removing clogged paper particles and dust inside the feed opening. How long should a paper shredder last? Unfortunately, a lot of people forget about this kind of maintenance when they add a shredder to their home office. It’s when you start to notice problems with the performance that you might remember that you do need to consider regular oiling. Pour the lubricant directly in the paper input from the left side to the right side in one smooth motion. Apply a thin line of oil from the top left to the bottom right of the sheet. And from top right to the bottom left. Make sure that you do not completely soak the paper with oil. You can hang these bags inside the wastebasket of your shredder. When the shredder is full you only need to remove the shredder bag and close the bag.Paper shredder oil isn’t just a generic oil. The oil is specially designed to use as a lubricant for paper shredders. But what is the oil made out of that makes it so ‘special’. According to research by Keith Barlow, from ABCoffice.com, the composition of shredder oil goes as following:

A: Sewing machines need to be oiled just like shredders do, but the products are not necessarily the same. With both sewing machines and shredders, the oils used mustn't be petroleum-based. However, even though some sewing machine oils are quite similar to shredder oils, chemical makeup can vary significantly. The manufacturer will have guidelines about the kinds of products that you should use and note that using a non-specific oil may void your warranty. ConclusionLubricant sheets are envelopes that help to extend the life of the machine by applying lubrication on the cutting blades, this helps to reduce friction and keeps the blades sharp and clean. Simply feed the sheet inside the feed opening of your shredder to lubricate the blades.