This concept was born out of the idea of a cushion that would allow you to totally let go, any time, anywhere. You can put this on and chill out in your living room, or loads of other places, that’s why we created it,” Takikou’s Shogo Takikawa said. Despite many loving the item, there were a few who had some issues. One shopper said: “This blanket does the job to keep you warm, and it feels soft and cosy, but the quality of the material isn't the best. It transfers a lot of fluff on to pretty much everything.” While the product was introduced to the market earlier this year, it remained under the radar until a recent tweet sent it viral, leading it to be featured on morning TV programs, where people fell in love with the genius idea. The Vicair AllRounder O2 is filled with the tetrahedron shaped SmartCells to offer skin protection and comfort. Suntory announces massive price spike for Japanese whisky, some types more than double in price 3 views

Unlike regular cushions, or regular bean bags even, this comfy item will mould itself to hug your curves with ultimate comfort as you sit and roll about from position to position. The Wearable Beanbag was created by Takikou Sewing, a company in Okazaki City, Aichi Prefecture, that specialises in beanbags, or “bead cushions” as they’re known in Japan. The time P.K. flatly refused a request from his deceased best friend’s mom at their first meeting 7 views The Wearable Beanbag comes in three sizes so parents and children can swap their matching pyjamas for matching beanbags instead. Regarding where to source the wire wool – I’ve now added a link in the supplies list to a very similar product to the one I used in this project (I can’t find the exact one, as I bought it in a shop, not online). I actually found it pretty easy to stuff into the pin cushion. It needed no manipulation; I just tore off small pieces and stuffed it, as you would with normal toy stuffing. I would recommend wearing gloves and a safety mask when when doing this though, as I’ve mentioned in the post. I found that it created a bit of dust, which is not good to be inhaling. However, once it’s contained within the pin cushion, it should be fine (I’ve used mine 5-6 times now with no problems). I hope this helps! Thanks again for pointing this out 🙂 – Mike. ReplyTo begin, you need to cut out two circles and one long rectangle from your fabric. The circles should be approximately 10cm in diameter. The rectangle should measure 35cm by 6cm. According to the company, the product was designed around the idea of a cushion that ruins people, a concept that’s become popular in recent years, where designers seek to provide customers with comfort levels so supreme they won’t ever want to move, leading to their ultimate ruin. Japan is famous for being a land of convenience, so when you want to stay warm and sit down for extended periods of time, who can be bothered to go to the effort of pulling out a chair and wrapping a blanket around yourself? Available in three different sizes and various colors, the wearable beanbag is easy to get in and out of, making it ideal for use virtually anytime, anywhere. One thing you need to keep in mind is that the adult version weighs around 5 kilograms (11 pounds), so it’s a bit heavier than your regular garments.

Take your other fabric circle and the long rectangle of fabric you cut out earlier. Pin the long side of the rectangle to the curved edge of the circle. When you’ve gone all the way round the circle and the two ends of the rectangle meet, fold the ends outwards (not inwards!). Hi Cheryl! Thanks for pointing this out. The toy stuffing was an error on my part. I had originally planned to use a blend of toy stuffing/wadding and wire wool, but I ended up only using the wire wool. My bad! I’ve deleted that from the supplies list now. Ta-dah! I designed this wrist pincushion, with an elasticated strap. No excuse not to use it! And the best bit? It’s stuffed with wire wool, so it will sharpen your pins as you use it! How cool is that? Using your sewing machine, sew the elastic to the fabric circle (remove the pins as you go). I used my Singer 7285Q Patchwork for this, which has the option for zig-zag stitches. This is perfect for sewing elastic, as the zig-zag stitch will stretch with the elastic – meaning it won’t snap if you over-stretch it.When it comes to pin cushions, it’s what’s on the inside that counts the most. The filling, after all, is what keeps pins in place, keeps the cushion steady, and can even keep pins clean and sharp. The most common pin cushion filling is polyester, as it is pliable enough to place and remove pins without much issue, yet structured enough to secure them. It is, however, a lighter material, so it may cause your pin cushion to slip or fall off the table easily. The beanbag is easy to get into — simply make sure the front tag is at the front when you pull it over your head, and then you can enjoy the beanbag life all day long. To remove, simply pull your hands inside and push it up over your head from the bottom. The activity cushion Vicair AllRounder O2 is available in three sizes: small, medium and large and has an average weight of only 800 grams. If there’s one thing I’ve learnt from over a decade of sewing, it’s that sewing is messy. As much as I like to think I’m super organised, that all goes downhill when the sewing machine comes out. Loose threads and fabric scraps fly everywhere, pins scatter over my table and bobbins roll around everywhere… it’s creative chaos! Is it weird that I’m kinda obsessed with my new DIY wrist pincushion? It’s very satisfying to wear… it makes me feel like a professional haha! I especially love that the wire wool will help keep my pins sharp, so they’ll last much longer. And I’ve finally got a solution to my messy sewing desk problem! Win-win! 🙂

Stuff the wrist pincushion with wire wool. I’d definitely recommend wearing a safety mask and gloves here, as the wire wool creates a lot of dust that you do not want to be inhaling. If you can do this step outside, that’s even better. If you want a pin cushion with more weight, look for one with steel wool or emery filling, both of which can clean and sharpen pins.Whether you work from home or are on the run for the whole day, it's always nice to take a break and lounge, even if only for a little while. Sometimes, it can be hard to find the right spot to settle in, though. Wouldn’t it be nice to find a comfy seat no matter where you are? Well, Japanese company Hanalolo may have the perfect, albeit awkward, solution: a wearable bean bag pillow, so you can be your own cozy spot wherever you are. Pokémon GO melds with Tokyo’s traditional neighborhood for Asakusa Routes event, gets thumbs up from us 4 views The beanbag is designed to be worn like a dress but the adult version does weigh around five kilos (11 pounds), so you can use it as a regular beanbag as well. Wrap the your elastic strap once around your wrist, making sure it’s slightly stretched. You want it to be tight enough to stay secure, but not so tight that it cuts off the circulation to your hand! When it’s comfortable, make a mark at the point that the elastic ends overlap. This will give you an idea of how long it needs to be. Cut the elastic at the mark you made, so you’re left with a short elastic strap. It would be helpful if you could share with us what the “wire wool” product you used looks like and how you manipulated the material to get it inside the cover. As for the idea of the barrier of plastic to keep pins from piercing the bottom of the cushion, I like it but I do not see how you could put it in place through the side slit. I also think you’d be unable to turn the cover right side out through the slit if you secured the plastic barrier between two layers of fabric after you’d sewn the elastic in place and before you turned the cushion cover right side out. Reply