Second, I’ve found that on adjustable handlebar mounts the tendency is for them to ‘drift’ over time. Generally speaking it won’t matter too much, except that the rails usually start to diverge as you get closer to the back of the saddle. I’ve got a pretty good eye for spacers these days with doing this all the time on various bike mounts, but the GoPro ones requires you to hold it a bit firmer and then really crank it down on the spacer. With the turn of a single knob, set your GoPro® to capture the perfect shot with the rugged and modular RAM® ball and socket mounting system. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third party advertisers.

For example if you have the Enve SES aero road bars that don’t work with a standard K-edge Garmin/GoPro mount due to the shape of the bars, could this GoPro bar mount be used to attach it to the stem instead? If you would like a profile picture, simply register at Gravatar, which works here on DCR and across the web. As in, you’re riding along and over the course of a few minutes, the position changes due to vibration no matter how tight the bolt is. This gives you: The handlebar mount itself, four additional spacers, a small hex wrench for adjustment, a baggie for the extra spacers, and a tiny paper manual. That then continued this year as well, getting more and more action cameras into the peloton and the grand tours in general.K-Edge or GoPro Saddle Mounts: I’ve long used the K-Edge rear-facing saddle mounts, simply because they were about the only ones out there made of metal.

Courier deliveries to Northern Ireland, Isle of Man, Isle of Wight, Channel Islands and the Scottish Highlands/Islands will incur a charge. with this mount, rotated to catch left or right side, it will definitely grab handlebar, hands, etc. We're on the doorstep of Flyup417 Bike Park, Cranham Woods, Cotswolds Way and an hour away from the Forest of Dean. This likely is not a benefit for attaching a GoPro only, but in the case of attaching a Fly6 via 3D printed mount like mine, it makes all of the difference! The main difference though is that K-Edge’s are metal, and the others are plastic, so they have more give and thus aren’t producing as stable footage.You can also clamp this mount to chainstays, small-diameter roll bars and bolt heads, or secure it to a pipe or pole to create a handheld boom. You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kitesurfing control bars, or even use to create a handheld boom – any pole that is in the size range above. Cycle to Work is a salary sacrifice scheme, where you can save up to 42% off a new Bike and Safety equipment.