Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule.

Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water. Do not eat, drink or smoke when using this product. Have a First Aid Kit available for any accidents Total Alkalinity (TA) is the measure of your hot tub water’s ability to neutralise acids. Balanced Total Alkalinity helps control the pH levels and the correct level to aim for is between 80 and 120 parts per million (ppm). If you are going away we would suggest emptying the hot tub and cleaning it so the water is not left to go stagnant. Do not re-fill until you return from your trip. Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it.

Chemical Water Treatment

If the pH of your pool water is above 7.6 then use ClearWater pH Minus to reduce it,using the application instructions on the bottle. Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels. Hot tub chemical maintenance is an essential part of owning a Lay-Z-Spa and is necessary for clean and healthy bathing water. It isn't complicated or time-consuming and can become part of a weekly routine. In our detailed Hot Tub Chemicals Guide you can find out everything you need to know from recommended chemical dosage amounts to hot tub chemical how-to guides. Tablets such as the Clearwater® Multi-Function Chlorine Tablets are only to be used for keeping your chlorine levels stable. Tablets are slow dissolving and will not have the same impact as granules. Around 60% of UK households are in hard or very hard water areas. To avoid scale build-up (which can impact water quality and pump components) use a weekly dose of ClearWater Scale & Stain Controller.

Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. The award-winning Bestway Clearwater Spa Starter Kit is a fantastic option for new inflatable hot tub owners and is an easy-to-understand introduction to the world of water treatment. Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris. This TA Increaser helps raise Total Alkalinity levels, which in turn will help control pH levels and chlorine.Periodic cleaning of waterline grease,steps and pool equipment will not only make your pool look good but it will optimise the use of your chemicals during a swimming season. Never use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products. Clearwater pH Plus , also known as ‘pH increaser’ is the best way to increase pH levels that have dropped below the recommended level. To avoid skin discomforts and enable the chlorine in your spa to work effectively, it’s vital that acidity is monitored and controlled. The recommended pH balance of spa water is between 7.2 and 7.6. It is important to get your hot tub Chlorine levels correct. Not enough Chlorine can result in unhygienic bathing conditions, whereas high Chlorine levels can cause irritated eyes or skin. Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur.

Start with the Total Alkalinity and aim for a reading of 80‑120 ppm. If it's low, add an alkalinity increaser, if it is high use a pH reducer. This is an ideal set of hot tub chemicals for beginners as it comes with a guide with simple, easy-to-follow instructions, dosing guidance, safety tips and problem-solving so you can get confidently get started with hot tub water treatment and maintenance. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine.

If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip. The gold starter kit also includes Clearwater 1kg Multifunction Mini Tablets which offer an incredibly simple way to maintain clear and hygienic hot tub water. The water treatment tablets are perfect for use with a Bestway 5in Chemical Floater, which slowly releases the Mini Tablets into the spa, to keep it sanitised. It’s a wonderful way to maintain healthy water if you have a busy schedule or are spending an extended time away from home. Clearwater® chemicals are designed for and tested on Lay-Z-Spa hot tubs but can be used on any and all home hot tubs. Chemical water treatment for hot tubs is essential regardless of how long or how often you plan to use the hot tub and this starter kit has everything you need to get started and keep up the water maintenance.

Sofas & Sofa Beds Chairs & Footstools Tables Storage & Home Throws Rugs Dining Chairs Dining Table Sets Cooking & Dining Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. Never mix different chemicals in concentrated forms including these kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur Chlorine is a sanitiser that controls and prevents bacteria growth and is essential for the hot tub water to be clean and safe to use. The recommended Free Chlorine* level in a hot tub is 3-5ppm (parts per million). For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million).Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ. Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user.