Speed Control - The trimmer has an on-board speed controller with three speeds - Low, Medium and High. Angle adjustable trimmer head: with 6 angle settings from 45° tilt-up to 70° tilt-down from the horizontal position Low noise and zero direct emissions made the DUN500WZ ideal for use within residential or noise sensitive areas.

The Makita DUN500 Cutting head has 6 angle settings, plus it can be folded flat for easy transport and storage. Smooth Cutting - The blades have a slight curve which aims to make cutting more smooth. It also has the effect of reducing friction, thereby reducing energy loss, meaning the trimmer can run for longer. Note that the blades are double sided.Can be folded in the 180°for easy transport and storage: Built-in clutch works to stop the blade motion even if the throttle lever is touched when folded

The Makita DUN500W is made for those higher hedges when multi angle cutting is desired. It has long runtime on a single 18v LXT battery (sold separately). New triple-edged cutting teeth are designed to easily catch and firmly hold branches. Curved blades reduce friction resistance to suppress energy loss. Due to the low resistance run time is increased. The DUN500WZ offers 3 speed settings to choose from and a reverse switch. For safety the machine will automatically power off if it is not operated within 60 seconds. Low noise and zero direct emissions made the DUN500WZ ideal for use within residential or noise sensitive areas.DUN500W is an excellent tool for tall and high hedges, thanks to its long shaft. Angle adjustable trimmer head makes trimming the top of a hedge easy, and allows trimming even in tighter spots. Angle of the trimmer head is adjustable easily with a lever. Performance - The Makita DUN500WZ Pole Hedge Trimmer is ideal for trimming medium sized hedges. It features a 50cm cutting blade and cuts branches with a diameter of up to 23.5mm. It runs at around 4400 strokes per minute. The Makita DUN500WZ offers long reach hedge trimming powered by Makita's LXT 18v battery range. Providing excellent cutting efficiency from the robust 50cm double sided blade, the blades cut in double-reciprocating cutting action with triple edge cutting teeth to capture and hold the branches while cutting them with ease with a 23.5mm maximum cut capacity. The curved blade design reduces friction which in turn suppresses energy loss and increase run times. The Makita DUN500WZ 18v LXT Cordless Brushless Pole Hedge Trimmer has an angle-adjustable head trimmer head with 13 angle settings through 135 degrees, 45 degrees tilt up to 90 degrees tilt down from the horizontal position and 6 angle settings, operated by a lever.

The curved blade design reduces friction which in turn suppresses energy loss and increase run times. The extended warranty excludes batteries, chargers, accessories, and clothingwhich will only be covered by the standard 1 year.Makita DUN500WZ 18V LXT BL Pole Hedge Trimmer Bare Unit The Makita DUN500W LXT brushless pole hedge trimmer is ideal for landscapers, groundskeepers and professional gardeners. The machine features an angle adjustable trimmer head with 6 settings from 45° tilt-up to 70° tilt-down from the horizontal position. Providing excellent cutting efficiency from the robust 50cm double sided blade, the blades cut in double-reciprocating cutting action with triple edge cutting teeth to capture and hold the branches while cutting them with ease. Fully brushless motor provides increased runtime, more efficient power transfer and a huge increase to overall tool life

Angle Adjustment - The Makita DUN500WZ Pole Hedge Trimmer has an adjustable angle which is controlled by a lever. It offers numerous angle adjustments so as to give you more control. The Makita DUN500WZ 18v brushless pole hedge trimmerhas been designed to becompact and lightweight, with a total length of 2.1m.With its articulating head, the blade angle can be adjusted between 45° - 0° and 0 ° - 70° with 6 intermediate stops and a 180 ° position for storage or transport. This versatile professional cordless pole hedge trimmer is suitable for pruning at heights and features a 3 stage speed control – high, medium and low speed, that can be changed by simply pushing a button on the easy to use LED display.