Fire door accessories: recommendationsFire door accessories assist with legal compliance and overall health and safety measures. We recommend that you keep the following in mind: In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°.

How can you make your fire doors more effective? Safety Accessories for Fire Exit Doors - Fast Delivery Correct specification, installation and maintenance of fire doors are critical to ensuring your building is safe.Protecting people and property through 3rd party accredited Passive Fire Protection services, nationwide. Fire door alarmsFire door alarms are fitted to fire doors to prevent unauthorised entry and exit. These alarms are triggered by the unsanctioned use of a door. Fire door alarms can be used on interior and exterior doors and are used in various industries for differing purposes. Integrated door control systems establish foot traffic flow in one direction. At All Things Inspector, we are experts at developing materials that help construction crews keep up with fire door compliance. Purchasing new or replacement fire doors requires accurate measurements and detailed knowledge on required materials and hardware to ensure compliance with regulations. Fire doors are a vital aspect of fire safety in any building, but they must be installed correctly and in good condition to ensure that occupants and escape routes are protected from the rapid spread of fire and smoke. For Wood Doors Swinging in pairs the clearance in between the leading and vertical edges of the door, the frame, and the meeting edges will not surpass 1/8 ″.

The Fire Door Gap Gauge is a simple tool used by fire door industry inspectors to measure clearance requirements per the NFPA 80 code compliance. Clearance requirements are the most recognized issue for fire door non-compliance. The Fire Door Gap Gage will speed up your fire door inspections, is more accurate than a tape measure and is compact and easy to use. The Fire Door Gap Gauge is too valuable to do without. Related products Keep in mind and note all clearance measurements on the pull side of the door so you can document them for your annual NFPA 80 inspection. This entry was posted on Thursday, November 1st, 2018 at 4:23 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. A fire door gap can be shortened through the use of surface-mounted smoke seals and rebated drop-down smoke seals. We can close the gap on existing fire doors easily using these products. This is suitable for an existing fire door gap up to 14mm on the underside of the door.Comply with legal requirements while catering for the practicality and need for open fire doors during normal circumstances. A fire door should have a gap around its base so that it can swing freely. But if the gap is too large, smoke and fire may be able to escape from an adjoining room into other parts of a building.