Most of the common incidents which can scratch your car, such as scraping along a low wall, kerb, brushing again another car or through an act vandalism (e.g. when cars are “keyed”) leave marks that are too deep for T-Cut to fix. Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). After the application, give the T-Cut Solution time to work its magic. Allow the product to penetrate the scratches, and once dry, use a clean microfibre cloth to buff it off, revealing your car’s refreshed original shine. Tips for Effective Use It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe?

Yes, T-Cut can help remove excess lacquer. Lacquer overspray can easily be removed with the Original T-Cut cutting compound. Can it remove spray paint? Each product has its own instructions, which are worth reading carefully before starting. Generally though, you need to wash your car, or at least the area of repair, thoroughly. You also need to ensure you’re applying car treatments in the shade. Whether it’s wax, polish or scratch remover, standing out in the midday sun will inhibit the product’s ability to function properly.Regardless of what type of car paintwork you have, T-cut can be used. For some additional uses, it is suitable for our boats, caravans and around the housework. How To Use T-Cut Correctly Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence The first thing to remember when “T-Cutting” a car is to ensure the paint is completely clean and dry, otherwise, you run the risk of damaging the paintwork when you start polishing it down. Cleaning the surface of your car is incredibly easy and can be done by either running the entire car through a car wash, or thoroughly cleaning and drying the car by hand.

This depends. If you are running an old car into the ground until its dying day, at which point you intend on scrapping it, or selling it for parts, then scratch repair is neither cost nor time efficient.

\n\t\t\tT-Cut Colour Fast Scratch Remover - Silver

From T-Cut Rapid Scratch Remover for light scratches to T-Cut Metallic Colour Restorer for metallic paintwork, the selection is abundant. Choose the one that matches your specific vehicle needs. Safety First The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months.

This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After Care Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine. For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?

Common Mistakes to Avoid

Step 3: Rub the T-Cut over the scratch with a steady and firm hand, ensuring you move the cloth in a circular motion. Do not be alarmed if your clothes change colour, as it is only due to the top layer of paint coming off. The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces: Sometimes, the first thing that will come to your mind is if you can fix it yourself. Thankfully, there are many products out there that are specifically made for removing scratches, one popular one being T-Cut. Read on to find out the details of the product, including a step-by-step guide on how to use it! What Is T-Cut Scratch Remover and what is it suitable for?

Like treating ageing facial skin, you wouldn’t expect a high-street store’s best moisturiser to do the same job, or produce the same results, as an injectable deeper dermal filler. How do I fix deep scratches on my car? Ultimately, using T-Cut will restore shine initially, but the paint will always fade (due to it being a paint restoration compound and not paint) and the best way to give an old car a new lease of colour life would be a new paint job. This can prove expensive. When not to use T Cut Deeper Scratches T-Cut Original Colour Restorer – Formula that restores the original colour and shines to paintwork.

Which T-Cut to use?

Yes, T-Cut can be used to improve headlight clarity and light visibility by removing haziness from clear, plastic headlights. It can also be used on window and plastic glass to improve clarity and add shine. To do so though, ensure you buy the right version of T-Cut. Coloured versions will not help with restoring headlights, for obvious reasons. Can it remove excess lacquer? As mentioned a couple of times through this article – there are several times where T-Cut is not the right solution. If tcut is not right for you, if the scratches are too deep or if you want expert guidance when fixing scratches to avoid any accidental damage, then this is where ChipsAway come in. Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution. Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process.