In Normal Time Mode, hold the RESET button while pressing the MODE button to toggle the hourly chime on and off. Hour format:In the timekeeping Mode ,Use ST/STP key to toggle between 12-hour(12H)and 24-hour(24H) timekeeping.

At this time, press the lower right button once, and the alarm clock pattern is displayed in the lower right corner, which means the alarm is turned on. To select the Minute, push the Start button while the Minute is flashing and until the correct Minute is displayed, then push the Reset button.On most watches, you can alter this setting by pressing “Mode” repeatedly until you find the 24-hour setting.

If you don't find the watch instructions you need in it, you can also contact me to motivate me to keep updating this collection. After the Second number is set, set the Minute number by selecting the Time Reset Mode and pushing the Reset button until the Minute number flashes; push the Start button until the correct Minute is displayed and push the Reset Button. Other watches may require you to use the “Mode” button to enter the time setting mode and the “Set” button to finalize the time.If the tip of the pencil breaks off in the hole, it may jam the button, making it impossible to set. If holding and cycling through the mode button doesn’t work, try pressing down the “Set” button instead. Press the lower right button again, and the upper right corner displays SNZ, which means The snooze function is turned on. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. It’s also impossible to ruin anything by experimenting with different buttons to see what they do, so you’ve got unlimited room to work here.

A former educator and poet, his work has appeared in Carcinogenic Poetry, Shot Glass Journal, Prairie Margins, and The Rusty Nail. In Normal Time Mode, hold the RESET button while pressing the START button to toggle the Alarm icon on and off. Use the "Mode" buttons to cycle through the various watch modes, like the stopwatch, time mode, and alarm.To set the Day of Month, select the Time Reset Mode and push the Reset button until the Day of Month number flashes; push the Start button until the correct Day of Month is displayed and push the Reset Button. You can try it first, if you have any other questions, please feel free to contact us, we will reply you as soon as possible, thank you!

To reset the Stop Watch to zero, stop the lap time by pushing the Start/Stop button, then push the Reset button (otherwise the Stop Watch will continue counting after other Modes are selected). To set the Hour, select the Time Reset Mode and push the Reset button until the Hour number flashes; push the Start/Stop button until the correct Hour is displayed and push the Reset Button.However, since more and more people leave me messages asking such watch guides, it is difficult for me to guarantee a timely answer, so I spent two weeks collecting and sorting out the manuals of SKMEI watches.