SAFE LISTENING / EVERYDAY PROOF IP55: Be Aware Mode lets outside noises in – so you know what’s around you. Designed for you, the JBuds Air Pro are created to keep you safe for a run, walk or let you converse while still listening to music. Another feature to offer surprisingly awesome value. The JBuds Air Pro are sweat and dustproof for your life on-the-go with an IP55 rating. Just pausing your tunes takes two taps, which feels like one too many, and if you accidentally trigger the Be Aware mode it’s hard to remember how to turn it off again. Is it two taps or three? And on the left or right bud? Press and hold 3+ seconds on each earbud. Blinking blue and white light on one earbud will indicate ready to pair to your device. If you’re looking for wireless earbuds that provide a more mobile, feature-laden experience, I suggest looking elsewhere. JLab has two apps, one being the aforementioned burn-in tool and the other reserved specifically for the Epic Air Sport ANC. When factoring in comfort levels, the JBuds Air Pro isn’t an ideal choice for movie watching, but that didn’t stop JLab from developing a Movie Mode to reduce audio lag with videos. I couldn’t tell the difference in performance between Movie and Music Modes because the quality was the same: smooth.

JLab JBuds Air Pro review - SoundGuys

The new and improved JLab app offers complete customization for all JLab App compatible models. Adjust Noise Control settings, Be Aware, touch controls, safe listening levels, and sound to your personal preference – or use the presets for JLab Signature, Balanced, or Bass Boost. Plus, get software updates for your product right when they’re available. Single and double taps on the right earbud also answer and end phone calls. Pressing and holding on the right earbud rejects a call, but the same gesture on the left earpiece switches between the movie and music listening modes. Two taps on the left earpiece summon your device's voice assistant. Three taps on the left earbud cycles through the EQ modes—JLab Signature (the default), Bass Boost, and Balanced. And three taps on the right earpiece toggles the ambient Be Aware mode.

How long does the battery last?

General Pairing Steps:• Open the case and remove the pull tab and take the earbuds out of the charging case Got all that? This layout doesn't make much sense to us and, to make matters worse, the capacitive touch panels often don’t register taps accurately. That means you might accidentally summon your phone's voice assistant (with two taps) when you meant to switch EQ modes (three taps). Plenty of affordable true wireless in-ears don’t have such chaotic control layouts. Worse, you don't even get the option to customize the controls because JLabs doesn't offer a companion app (though we don't necessarily expect earbuds in this price range to include an app). The mic sounds fine and we had little trouble understanding every word in a test recording on an iPhone, despite a faint signal and plenty of Bluetooth audio artifacts. Over a good connection, calls should sound clear enough. The Be Aware ambient listening mode is effective; it enables you to easily converse and hear your surroundings without removing the earpieces. The charging case is just above average in size, with a flip-top lid and status LEDs on the front panel. JLab remains committed to the hardwired charging cable, which snaps into a recessed area on the bottom panel for tidy storage. We're not fans of the hardwired design—not only is it impossible to replace the cable, but the cable is also very short. Yes, the products in JLab's lineup are affordable, but adding a standalone cable to the box shouldn’t affect the price significantly. More importantly, a hardwired cable decreases the value—if it goes bad (and cables eventually do), you need to replace the whole case (or, more than likely, the whole product) rather than just switching out the cable.

To: Pair Your Headphones, Earbuds to Device – JLab How To: Pair Your Headphones, Earbuds to Device – JLab

CONNECT TO MULTIPLE DEVICES: With Bluetooth Multipoint you enjoy the versatility of transitioning seamlessly from device to device. Hop from podcast on your computer to a call on your mobile. You can connect simultaneously to two devices – mobile, laptop and/or computer. One earbud will blink blue/white indicating ready to pair to your device. Select "JLab JBuds Air Pro" in your device's bluetooth settings. To prevent this from happening, you’ll need to “forget” your earbuds from a previously connected device and try pairing them to your new device once again. Ensure both earbuds are placed correctly in the charging case JBuds Air & JBuds Air ANC (Active Noise Cancelling)• Auto-Connecting Earbuds: Press and hold the power button both buttons 3+ seconds to power ON. One earbud blinks blue/white indicating ready to pair to your device.

The JLab JBuds Air earbuds are good for working out

Select Device Name in your device's Bluetooth menu settings to connect. Make sure you turn on bluetooth. Voice prompt "You're connected" followed by blinking white lights will indicate you are connected. How To Pair: JLab Go Air / Go Air Pop / Go Air Sport / Go Air Tones / JBuds Air ANC / JBuds Air V3/ V2/ V1 /Jbuds Air Icon : As mentioned above, in some cases, the pairing process may have just run incorrectly, and all that would need to be done is for you to restart the process. To do this, go to your device’s Bluetooth list and “forget” your JLab earbuds. Now place your earbuds in pairing mode to reconnect and select them on your device’s Bluetooth list, and they should now be connected. How To Pair: JLab Go Air / Go Air Pop / Go Air Sport / Go Air Tones / JBuds Air ANC / JBuds Air V3/ V2/ V1 /Jbuds Air Icon : DUAL CONNECT EITHER EARBUD: Use either earbud independently or use both together to match your activity and environment. No matter Left, Right, or all-together, you can always count on great sound. And with a built-in MEMS microphone in each bud, you’ll get clear calls every time.