Hot tub chemical maintenance is an essential part of owning a Lay-Z-Spa and is necessary for clean and healthy bathing water. It isn't complicated or time-consuming and can become part of a weekly routine. In our detailed Hot Tub Chemicals Guide you can find out everything you need to know from recommended chemical dosage amounts to hot tub chemical how-to guides. We hope the guide to How Many Chlorine Tablets in A Lazy Spa fully answers your question about lazy spa chemicals. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine. Make sure that any outdoor storage of chemicals is as far away from your hot tub as possible and in a dry, covered area. Humidity or even small amounts of water can cause chemical reactions that could lead to dangerous fumes.

Initial Dosage: Start with approximately 1-2 chlorine tablets (20g each) for a small inflatable spa with a water capacity of up to 500 litres. Adjust the dosage as needed based on water conditions and usage. Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels. Regular Monitoring: Regularly test the chlorine levels using test strips or a water testing kit to ensure the levels remain within the recommended range. Adjust the tablet dosage if necessary to maintain proper sanitisation.Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it. General Guidelines for Initial Chlorine Dosage: While specific dosage recommendations may vary depending on your Lazy Spa model, here are some general guidelines based on common Lazy Spa sizes and water volumes: After testing the PH with your dip test strips you can use the following chemicals to increase or decrease the PH.

ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function. Tablets such as the Clearwater® Multi-Function Chlorine Tablets are only to be used for keeping your chlorine levels stable. Tablets are slow dissolving and will not have the same impact as granules. By working with a variety of trusted Range Plus Partners, we’re able to offer our customers a wider selection of products.Determine Dosage: Refer to the manufacturer’s guidelines and recommendations for your specific Lazy Spa model to determine the appropriate chlorine dosage. Factors such as spa size, water volume, and bather load can influence the dosage.