The entire structure is designed for quick assembly, which can generally be completed within 10-20 minutes. For CO2: Use the Laser Tools> Material Test Generator, varying speed and power, find the lowest power and highest speed that it reaches the darkest dark colour. Asian Countries: Singapore, Malaysia, Japan, Thailand, Korea, Philippines, Vietnam, Indonesia and so on. Use the Laser Tools>Interval Test to find the point where the lines juuust touch (don’t overlap, nor have gap).

The stepping motor and the lead screw are integrated which makes the movement of the laser more accurate and the coupling more durable. Like the Sculpfun, the Atomstack A5 Pro laser engraver also comes with good assembly instruction manual which Is easy to follow. Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. Power is varied from 10% to 100% in 10% increments and the speeds are 600, 1200, 1800 and 2400mm/min.At the top of this article, you have the video showing how the tests were done and below you will find detailed images of the test results together with explanation. The rectangular spot will also cause some headaches when cutting some tight fitting finger joints for wooden boxes. It can engrave/cut wood, leather, paper, etch paint, but is less effective onwhite paint, certainblues, and clear acrylics.

It is great for some tests, but I chose Lightburn instead which is much more capable software, and it is very intuitive to use.Solid and easy installation structure design: The full-metal structure design makes the machine more solid, reduces machine vibration and improves engraving accuracy. Precision Scale Line Axis】X-axis and Y-axis contain precision scale lines, which is convenient for you to carry out quick length measurements. Screws and parts come in separate bags, labelled accordingly to the necessary step in the assembly manual. On the other hand, it is only the speed and the number of passes that manage time … the max and min power have no effect on the engraving or cutting time.