In extreme cases, where condensation is forming on the walls and/or the ceiling, then extra insulation would be needed,” says Tim Pullen. “Keeping the walls and ceiling warm will stop the condensation forming on them —a product such as Sempatap is specifically designed for this purpose.” How to stop toilet condensation Ensuring that the surface is fully dry, apply the paint as per manufacturer’s instructions. Allow to dry fully before applying a second coat. Read on to find out what causes condensation, how to get rid of it – in both the long and short term – and what to do if you have a serious condensation problem.

Use lids on saucepans when cooking. This stops the moisture from the steam filling the kitchen and condensing on surfaces and it will also save the tenants money! MGC Mould Treatments, Fungicidal Paint/Paste Additives and Fungicidal Paints and Coatings are approved under C.O.P.R 1986 by the Health and Safety Executive. MGC products provide a proven and effective solution for the eradication and prevention of mould problems, even in the most severe situation. Sempatap and Sempafloor thermal insulation are economical, easy to use solutions for condensation problems on cold walls, ceilings and floors. PROBLEM: SOLUTION Severe Mould: MGC Professional System Ground water can rise up through the walls and floor if the damp proof course isn’t working properly. Keep in mind that in some circumstances cavity wall insulation can be the cause of damp, but this tends to be rare. See our advice on penetrating damp for more details.

How to Prevent Black Mould From Occurring?

You may find that having your heating on a constant low heat is better for damp (and for your air temperature) than having it frequently swing between hot and cold.

To prevent condensation and mould growth, it's essential to have good ventilation in your home. Ventilation helps to remove excess moisture from the air and prevent it from settling on surfaces. There are several types of ventilation systems available, including: Ellis Cochrane has been a Freelance Contributor for Ideal Home since 2023. She graduated with a Joint Honours degree in Politics and English from the University of Strathclyde and between her exams and graduation, started a lifestyle blog where she would share what she was buying, reading and doing. In doing so, she created opportunities to work with some of her dream brands and discovered the possibility of freelance writing, after always dreaming of writing for magazines when she was growing up. Install a highly affordable and zero-maintenance Perma-Vent passive ventilation system in the bathroom and kitchen.Prepare your surfaces by removing any loose material e.g. flaking paint or wallpaper. Make sure the surface has a smooth finish. Dehumidifiers vastly improve damp and condensation problems in a home because they reduce moisture levels. They’re most useful in rooms where there’s a lot of humidity. For example, a kitchen or bathroom. A room where clothes are dried. Or in a bedroom where condensation builds up from the heat caused by breathing. Prepare your surfaces by removing any loose material e.g. flaking paint or wallpaper with a hard bristle-brush. Make sure the surface has a smooth finish. According to the German Federal Environment Ministry, it has been proven that children who grow up in rooms with visible mould suffer from adverse effects to the development of their health. There is also evidence that shows a correlation between mould and asthma – both in terms of the condition developing and worsening. Mould can lead to respiratory infections, coughs, wheezing and shortness of breath, and it is suspected to be a cause of bronchitis and allergic rhinitis (hayfever).

Thermal resistances can be items of furniture, textiles, curtains and other objects that can retain heat. Air can reach the gaps between the resistances and the walls or floor, but relatively little heat can get in to these spaces. This in turn leads to condensation and moisture, which is highly conducive to mould growth. Important note: Each mould test kit analyses one room, so please increase the quantity according to the number of rooms you want to test. We recommend testing bedrooms, living rooms and children’s rooms (where applicable)

Follow the instructions above for removing mould from your walls. Once the wall is completely dry, you should use the Anti Mould Paint Additive following these instructions: White mould is inconspicuous by nature. Thanks to its colour, it tends to remain hidden for a long time when it arises on walls, window ledges, window frames etc. It doesn’t tend to develop a strong smell, so it often remains undiscovered, or you simply get used to the room’s slight change in smell. White mould is often confused with other issues, which may look similar to the untrained eye. These include efflorescence caused by salt or limescale, dry rot or saltpeter. A lab mould test can be a great way of finding out whether the indoor air contains different types of white mould or to investigate a suspicious material more closely. Always use the extractor fan in the bathroom, if there is one. Keep the bathroom window open and the bathroom door shut when showering and use a bath mat. Mould on walls is often the result of excess moisture in the air, leading to condensation. These simple tips help you reduce the amount of moisture in the air. A dehumidifier is an air conditioning unit that removes humidity from the air to prevent the build-up of condensation and damp.