Varnishes are tough, hard wearing and easily cleaned. Wood varnish is generally more durable than a wax or oil but is not as easy to maintain or repair if it becomes worn or damaged. The latest applicator technology makes life much easier. A T-bar applicator, for example, is great for applying any finish, even fiddly bits like door frames, and tends to be faster than a lambswool applicator. However we have just had some new products sent our way however and there is a possibility of lightening your wood with the Woca products, when asked your question they have recommended the Application of WOCA lye on new or sanded wooden surface and then next day application of 1-2 coats WOCA Master oil extra white. This may not give an exact oak look, but may be closer to what you are looking to achieve. Manns Trade Light Fast Wood Stain in Light Oak. It’s a really nice stain to work with, and it goes on nice and easy and it comes in a brilliant range of colours. When you are applying a varnish to wood it’s really important to make sure the wood is well sanded, to a p120 minimum.

Bona Microfibre Floor Mop, which makes applying their wood finish products a dream. Then there’s the The point of using a brush is that you’re forced to watch what you’re doing very closely, since the application process is pretty slow. This is especially vital for the acid cure application process because this type of finish tends to leave “missed spots” on the floor due to separation, which you can easily overlook if you apply the finish with a roller or t-bar. Different t-bar lengths and sizes are available, so with wider t-bars you need more finish, and you have to ensure that your turns are very smooth to avoid the appearance of any mistakes.Between coats, you can keep brushes and other applicators in airtight bag or container to prevent them drying out. And after application brushes and equipment should be cleaned immediately after use with warm water and wiped dry. Hand buffing and drill buffing brushes let you create a stunning deep shine and lustre with ease. Our low cost yet highly effective disposable foam brushes let you make a lovely, clean straight edge without leaving bristles behind. And floor brushes are perfect for applying any kind of oil, stain or varnish to large areas.

Floor varnish is a popular solution for protecting and enhancing the look of wooden floors. There are different types of floor varnish that you can choose from, such as oil-based, water-based, and polyurethane. Each type has its own advantages and disadvantages, so it's important to understand the differences between them before making a decision. One of the main benefits of using floor varnish is that it can help seal the wood, preventing it from absorbing moisture and dirt. With any project and products like this I would strongly recommend test areas first, wood can be unpredictable at times and its best to ensure you like the result before completing the whole project. So I have let this dry for a few hours, the next step is “de-nibbing” or giving the area a light sand, I’ll be doing it with a Wipe on, wipe off. These high quality cloths are colour and lint free meaning no fibres trapped in your oil finish. Ideal for applying a wide range of wood oils and wood stains.

Step 2 - Prepare for the Main Task

Water-based polyurethanes dry faster and smell less, but they can raise the wood’s grain slightly on some softwoods. This isn’t a problem as the process of denibbing between coats will help to keep the final finish smooth. Water-based polyurethanes don’t go well over oil-based wood stains but work well over solvent-based wood stains and white-spirit based stains. Most pros use water-based varnishes because they have virtually no smell. Faster than a brush, smoother than a roller. The Brushmaster floor varnish applicator kit is specially designed to apply a smooth, professional finish to parquet and wood floors. It will be vital if you do do this that you create enough for full coverage of two coats, too have to mix a second batch to complete the job will result in a variation of colour. There is also the option of adding the clear oil to the tinted oil to adjust the colour slightly or visa versa, this needs to be done with care and exact measuring, starting with very small ratios to get the colour and then when you have the desired result mixing larger amounts suitable for the areas to be treated. Its not something that we always recommend unless you have some experience and are exact with measuring