Grommets and leather go hand in hand, and whether you’re making leather jewelry or a leather purse, grommets add both functionality and style. Grommets can be used to create different design patterns and give leather accessories a punk, edgy look. When strategically placed with decorative stitching, grommets transform your leather projects. Denim

Tools - Gefen Sports Stringing Tools - Gefen Sports

Keep the fabric with the wrong side/marked side up. Since I didn't want the fabric to unravel at the edges, I took that extra inch of fabric around the line from the pattern and folded it over. An iron is helpful here to get it to stay in place, and especially if you're working with heavy fabric. As you can see from the pictures, my pattern has a lot of curves, so I needed to do some work to get that seam allowance to fold flat.Other reasons could be that the fabric they were placed on ripped at the wrong spot and the rip made it all the way to the grommet. Or someone placed the grommets too close together and there is not enough strength in the fabric to hold them in tight. These are the metal bits used in the large grommet presses to insert the barrel into the ring and put them together. Many can also cut the hole in your project at the same time, the exact size you need. That type of blow will not damage the eyelet and keep its integrity intact so it can do the job you want to be done for many years. Heavy blows would only damage the eyelet and make you start all over again. When you think of hammers you may think of hard, heavy blows that drive nails into wood. That would be the wrong way to approach an eyelet. These are more delicate pieces of sewing accessories that need a softer, more gentle yet firm woman’s touch. The now spread edges grab onto the fabric holding the eyelet firmly and securely in place. The hole should have been made by a handy hole maker. Put a hard piece of fabric like leather under the cloth you are making a hole in and clamp both with the hole maker.

How to Make a Roll Up Tarp - How To Truck

Measure out the dimensions for both length and width so that you have an accurate estimate for how much fabric will be needed. If possible, try to overestimate slightly as this will give you a bit more wiggle room in case something goes wrong during construction or if adjustments need to be made later.Start by choosing the right tool for grommet installation. Whether you use an inexpensive anvil and setter tool kit or a heavy-duty hand press, you need a solid surface.