It features an adjustable rip fence with a miter gauge to allow for accurate straight or mitered cuts and it also has a bevel angle range of between 0-45 degrees. The coolant reservoir is similar to our previous choice and built into the base of the saw directly under the blade. It can hold up to 16 ounces of water and keeps the blade wet as it spins. The blade’s spray shield also serves to continually drip water onto the blade. Works with Either Water or Oil | Again, although water is recommended for easier cleanup if you prefer to use oil you can do so with this machine. Either way, both saws come with an adjustable rip fence that clips into the saw table allowing you to accurately cut straight lines in stones or glass. What We Like:

110mm Wet Tile Saw | DEWALT

Used to distinguish individual users by means of designation of a randomly generated number as client identifier, which allows calculation of visits and sessions. Though obviously the saw table area is smaller on this mini trim saw, you would only be using it to cut smaller material anyway and you still get a surface area of 7-1/2 inches by 4-3/4 inches to work with. What We Like: Though the smaller 4″ and 5″ blades don’t allow for larger cuts, this little trim saw may be all you need.

Rubi Wet Saws

A coolant reservoir that holds 32-ounces of water keeps the blade constantly wet. The reservoir is conveniently located in the base of the machine. The blade sits in the water reservoir so it stays wet as it turns. It also captures and utilizes the excess water from the blade’s spray shield. We found clean-up to be an easy process too. The reservoir has a plug to drain the dirty water when you’re done. Northants Tools is one of the leading suppliers of Wet Saws online. Our exciting range of Tiling Tools has been sourced to meet all your tooling requirements. No problem, I can’t personally recommend any at this time for any specific one because I don’t have any expert knowledge for cutting large pieces than this. But I did find something that may be a starting point for you if you want to take a look. https://cuttingedgesupply.store/collections/slab-saws I think these might be more what you are looking for.

Makita 4101RH 125mm Stone Cutter (110v) - Fastfix Makita 4101RH 125mm Stone Cutter (110v) - Fastfix

Good Construction | It’s made from unbreakable, cross-linked polyethylene, and the saw housing is rustproof and resistant to impact. Can Be Used as a Wet or Dry Sander | Depending on which is more suitable for the project you are working on. The green blade it comes with is a notched rim saw blade. This type of blade has diamond grit pressed into the edge of a solid steel core.

Wet Saws

It comes with two mandrels that spin at between 0-10000 revolutions per minute and accommodate the included4-1/4 inches buffing wheels, though it’s worth noting, it is also capable of taking buffer or grinding wheels up to 7-inches – you can even use two different grits at the same time. This American-made saw has an unbreakable, cross-linked polyethylene structure and the saw housing is rustproof and resistant to impact. It comes with a one-year manufacturer warranty. What We Like: Most notably, however, it comes with a highly useful, detachable and flexible, 42.5-inch multifunctional tool, suitable for a wide variety of projects or finely detailed work. What We Like: day warranty unless registered after which it extends to a full 2 years. See more information here.

Stone Cutting Saws | Wet Stone Cutting Tools | Stonegate

If you are looking for something more professional, have a look at VITREX 103420 Versatile Power Pro 750w Wet Saw Just to be clear, the lapidary saws I am comparing are suitable for jewelry making. If you want to cut anything larger, this guide is not for you, and you will need a bigger saw.

Other Items

Pro tiler Ltd T/a Northants tools is an Introducer Appointed Representative of Pay4Later Limited, trading as Deko, which is authorised and regulated by the Financial Conduct Authority (FRN 728646). Deko is a credit broker, not a lender and does not charge you for credit broking services. We will introduce you exclusively to Duologi finance products provided by Duologi which is a trading name of Specialist Lending Ltd. Categories Products Review product GMC 1250W Wet Stone Cutter 110mm - GMC1250 - Code 263288 GMC1250

Cutting Tool Hire - HSS Hire Masonry Cutting Tool Hire - HSS Hire

Works with Either Water or Oil | Although water is easier to clean up you can use oil with this machine. The trim saw we have featured comes with a vise attachment. This is a valuable tool that keeps your hands away from the blade and helps to make precise cuts, though you can, if you prefer, buy a cheaper version with no vise attachment. Fourth wet tile cutter saw you should be thinking about is Silverline 802165 – DIY 450W Tile Cutter 230V Multifunctional Tool | This machine can cut, polish, grind, and carve – cutting down on the need for additional tools to complete a project.

GMC1250

Last but certainly not least tool we revied is TILE RITE TRP438 450W Compact Portable Wet Tile Cutter It’s powerful too. It has a 1/4 HP motor which delivers a variable speed of between 800rpm and 3,400rpm depending on how fast you want it to go.