Just like you would for a single line strimmer, locate the spool within the trimmer and remove it. The next step is replacing the strimmer line with your strimmer wire replacement. Make sure that you place the pieces of strimmer wire correctly through the starter holes in your spool. The rows of wire you create should go around the full diameter of the spool to prevent jams when you begin using the device later.

Strimmer Wire - DIY Garden How to Replace and Fit a Strimmer Wire - DIY Garden

If you’re replacing the cord in your standard string trimmer, start by turning the device off and making sure you have a length of line appropriate to your device. You should be able to find the kind of thread you need for your strimmer by looking at the existing spool in the trimmer head or by talking to one of the professionals who sold you your strimmer. Today, we’re going to give you the guidance you need to replace the string in the trimmer head of your strimmer without any fuss or headaches.These step by step instructions should be easy to follow. Remember, though, when replacing strimmer line on your trimmer, the first step should always be to look for guidance from the manufacturer on everything from line diameter to line width. Take off any old wire that may still be on the spool. Wear gloves when doing this, as the line can be sharp. 5. Insert The New Wire

Parkside Electric Grass Trimmer PRT 550 A3 Unboxing Testing Parkside Electric Grass Trimmer PRT 550 A3 Unboxing Testing

As you do this, keep inserting the wire into the attached eyelets or holes and keep it as tight as possible. This will help to prevent your strimmer from jamming once you’re using it.Ensure the lines are correctly positioned in the hole or eyelet sections provided, and wrap the line around the spool in the one direction advised on the reel or the device itself. You might be able to see an arrow on the sidebar to help you with this. Wrap the lines as neatly as you can; otherwise, you may need to redo the entire thing. Remember that it’s better to cut a string of the wire that’s too long than one that’s too short. You can always trim the string later, but you can’t add more length if you discover that it’s not covering the full width of the strimmer head. Unfortunately, like all devices, a string trimmer will also need regular maintenance to keep it working as it should. Knowing how to replace your trimmer line when it breaks means that you don’t have to buy an entirely new set of power tools every time you have an issue with your strimmer. Ensure the engine on the trimmer is turned off before you begin removing things at the top or bottom of the device. When you’re ready, remove the retaining cap from its place on the top of the trimmer head. It will usually involve unscrewing it from the blade or motor section or following step-by-step instructions for popping various tabs. Now that your spool is empty, look for its starter hole – some strimmers have one, while others have two. You’ll need to insert the tip of your new strimmer wire into this hole, before winding the strimmer around the wire. Most strimmers will have arrows printed onto its spool to show you which way the wire should be wound.