They are very bright and have decent bass for open backed headphones, but certainly not an excessive amount. The higher-impedance versions are suggested for use in more critical applications because they are less likely to increase measured distortion or frequency response variations from most equipment. They are supremely comfortable, and for me present a level of comfort that all manufacturers should strive for.

A lightweight, open-ear design, circumaural headphone with folding headband and 90 degree, swivelling ear-cups.DT 880's have an outstanding soundstage, the 3D imaging surpasses the others in my test, width and depth and even height is revealed in a very pleasing mannor. DT 880 Pros feel solid and give the impression that they’re designed with not the most careful user in mind and will not fail without a fight. If you want to save a few more euros, go for DT 880 Edition – you’ll get the same sound and overall quality at the expense of shorter cable and looser clamping force, which may be a good thing, depending on who you ask. Nevertheless, the special edition version still remains on “neutral ground” as far as the frequency image is concerned, making it quite possible to make an honest evaluation of the results of a mix.

For anyone questioning if the 600 ohm is suddenly competitive with top tier headphones for resolve, it just is not. The top sounded 'cotton candy'ish' to my ears and unnatural and the bass was too loose for my tastes. Zum anderen laiert die Halterung an der Ohrmuschel gern etwas aus wenn das Kabel mal etwas Spannung hat. As always don't compare these to anyone else's measurements, but other than that it's even more self-contained in that they're likely different from my other squiggles too, haha. Let’s say a playback of 100 hours provides audible improvements, along with softening of earpads and a relaxed clamping force.After using Bose headphones for quite some time (for composing) and getting used to its pleasing sound I thought I step up the game in investing in some proper mixing headphones. Ein hochohmiger Kopfhörer begrenzt den Stromfluss durch seine Impedanz und "verlangt", dass die gesamte elektrische Leistung in Form einer Spannung vorliegt. But since the beyerdynamic dt 880 are 250 ohms you will need a headphone amplifier to power them to their full potential. Trebles improved slightly by tuning them way down, but rang metallic through and through, though muddied. We have measured great quantities of this model and any deviations between channels are rare, and when they do occur they are not substantial enough to cause any concern as they are inaudible most of the time.