The use of nails or screws will help the skirting board to match the shape of the wall as there will be enough strength to flex the board in to position. This will give a better finish and will prevent the skirting from making the wall look more uneven. There are times where nails or screws should be used for attaching skirting boards to walls. The need for nails really comes down to what you are fixing your skirting on to and how even the walls are. For plastered walls or plasterboard with timber studs, then you can use either an adhesive on its own or a mix of adhesive and oval wire nails – ensuring that you nail these in line with the timber studs. For the uninitiated, choosing the right nails for skirting board can seem a little daunting. The reality is that you may not even need nails at all and with a few minutes of planning you can ensure you have everything you need to install your new skirting boards as soon as they arrive. Skirting Line Dedicated】This non marking nail for skirting is designed specifically for installing skirting lines, so you no longer need to worry about falling off the skirting lines or rusting the nail holes, which will affect the aesthetics.

High-Quality Nails ------ Our Double screw nails are built to meet your long-term needs. By securely holding the skirting boards in place, they guarantee a durable and reliable installation. This high-quality construction adds to the overall aesthetics of the skirting board, providing a clean and sophisticated finish to any room. TIPS: All goods are authentic, with genuine patents, counterfeit must be investigated! Customers, please identify our products!!!Right, remove the skirting, run a goodly bead of solvent-free along near the top (about 10mm down) and a ditto near the bottom (about 15mm up), and then some wobbly beads in between (depending on how tall your skirting is). Skirting Line Dedicated】 You no longer need to worry about falling off the skirting lines or rusting the nail holes, which will affect the aesthetics.

Using nails in addition to adhesive will allow for a more secure fix. It also eradicates the need to use props to hold the skirting in place while the adhesive sets. The use of pin (small diameter) nails can also be applied when joining two mitres together. You should apply a small amount of adhesive or PVA glue when joining the two angled pieces but using a couple of small nails will help create the perfect join.Give Away Special Tools】This nail specific sleeve tool allows you to place the nail into the sleeve and directly tap it into the wall. If you have a dry lined wall with masonry behind it then be sure to use screws that are long enough to penetrate the inner masonry wall – usually around 80mm screws will suffice. Versatile Application ------ Our Skirting nail tool have a wide range of uses. They are not only suitable for skirting boards but can also be utilized for hanging photos, engaging in craft projects, or general maintenance. They are a versatile tool that can assist you in various tasks around the house. One exceptional advantage of the Double-Head Skirting Thread Seamless Nail is its ability to create an almost invisible result.

Double-Head Skirting Thread Seamless Nail ------ Our Double Headed Skirting Nails is specifically designed for interior decoration, providing worry-free attachment to skirting boards without the risk of them coming off or the nail holes rusting. This seamless installation enhances the beauty of your interior, giving it a more polished and appealing look. The double-headed design ensures easy and discreet attachment, leaving no visible nail heads or marks. Then position the skirting, hold it in place with yer foot whilst you gently tap it along its length with a soft mallet to nicely squish the adhesive in place - chust pressing it firmly into place is fine too. A squeeze of adhesive coming out along the top is good. Ok, now keeping it in place with yer foot, hammer the PPs in just enough so's they grab in the masonry (ie - in the plaster layer). Just tap them in enough to hold - do NOT over-hit them or they are likely to bend and then move the skirting board or break the plaster.When fixing your skirting board to masonry walls you will need to make sure that you use masonry nails or screws. If using the latter, you should start by drilling pilot holes in to the masonry wall before inserting wall plugs that the screws will be fed in to. For nails, you should simply hammer these in around every 50-60cm. Strong adhesives such as Gripfill are without a doubt the easiest way to attach your skirting to the wall but they can be troublesome with walls that are not even – which is a common problem even in modern homes. Top Tip: To ensure you drill holes deep enough measure the depth on the drill bit and mark it with a piece of masking tape. Then you just ensure you drill to that depth each time.