These adapter cables let you connect a SATA HDD or SDD to a USB-A or USB-C port and are ideal for recovering data from an old PC or drive. To launch the BIOS, you have to press a hardware specific key before the computer boots into Windows. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.

If you are adding storage to your existing configuration, you should leave the original hard drive installed where it is and skip down to Step 5. You've noted that the HD is SATA, so you will need a SATA cable between the motherboard and the drive, and a SATA power cable from the power supply to the drive. Installing a SATA hard drive to the internal slot on the motherboard is often a better solution than using external adapters or enclosures that are rather costly and notably restrict the data transfer speed.

Luckily, most new hardware arrives in an anti-static bag and should come with a handling warning, too. First and foremost, ensure that the case of your computer provides enough space to mount the required number of drives. To learn more about other possible installation methods, please, refer to the article devoted to choosing a method for connecting SATA drives to a computer. At the same time, you should mind that some of the slots are probably occupied by the existing hardware. On the other hand, if you are using a SATA cable to add additional storage to a configuration, you do not need to address the existing hard drive.

Many different types of SATA cables are available, including products from some of the leading brands in the industry.In the first place, look for them at the lower front, but it will be better to refer to the manual for the exact location. Mini or micro SATA cables are also available for internal drives and assemblies involving small-form components. Locate the HDD you wish to replace and disconnect each of the two cables coming out from the rear of the drive. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you.

Moreover, other data cables might feature an angled connector, making it easier for you to connect them to your storage devices in tight situations. You can find her on the backend of a tech blog near you, or enjoying the outdoors in the Pacific Northwest. If you are using a laptop rather than a standard PC, the chances are that the laptop’s storage devices (HDDs, SSDs etc) are attached directly to the motherboard. I'm replacing my SSD with an HDD and I want to hook it up to format and migrate the OS with AOMEI Partition Assistant, which is why I can't use the cable that my SSD is using right now. However, if your computer doesn't detect the new drive by default certain BIOS settings will require a tweak.

We'll show you everything you need to know about installing a SATA drive, and how to connect the power and data cable. Less common SATA power connectors are the 6-pin, +5 VDC "Slimline" connector first introduced in SATA release 2. Serial Advanced Technology Attachment cables are special types of cables, which are mainly used to connect multiple types of storage drives (optical drives, hard drives, solid-state drives) to a motherboard. g. hard disk drives, optical drives, solid-state memory drives) to a host bus adapter such as a motherboard. Once the computer is turned off, you can open the system unit by removing the screws on the back panel that hold the side panel.

There are various different SATA cable types, ranging from varying lengths and connector types to products produced by differing brands. Connect one end of the SATA cable to the hard drive, then connect the other end of the cable to one of the free SATA connectors on your motherboard. Touch a metal table leg or the case of your computer (do this after discharging your motherboard, as described above). We're always available to help with questions, including product selection, sizing, installation and product customization. The benefits of SATA power cables include increased current capacity and reduced electrical impedance.The following steps are suitable for installing both SATA HDDs and solid state drives, considering that they normally have the same connectors.