Leyland Fast Dry satin is a fully water-based paint, meaning it will never discolour over time. This is an issue with all modern oil-based paints, which is why water-based is becoming increasingly popular.

Perhaps the best feature of the Aqua Satin range, though, is the incredibly wide variety of colours. While there’s an impressive range of neutrals and pastels, you can also find this satinwood paint in everything from rich, dark reds to bold, bright blues, making it perfect for those looking to create a unique and vibrant space. How long does the painted surface need to cure before it can be exposed to water? It is recommended to allow the painted surface to cure for at least 7 days before exposing it to water or cleaning. This ensures the paint fully dries and achieves maximum durability. The Aqua Guard covers well without an undercoat, while Leyland’s coverage was significantly less impressive. Even a third coat struggled to get the job done. The paint was difficult to work in by brush, and even splaying the bristles didn’t help. The Leyland paint has a recoat time of four hours – typical for a water-based product. Success Story Ensure proper surface preparation by cleaning and, if necessary, sanding the surface before painting.

Filters

Key Specs – Paint base: Water; Approx. coverage: 16m 2per litre; Touch-dry time: 1-2 hours; Recoat time: 6 hours; Other colours available: Yes Aqua Guard is probably the brand leader amongst trade professionals, and it’s a product I can vouch for.

With that being said, the opaqueness left something to be desired. It took me three thin coats to reach a good opacity, which was a surprise coming from a world where two coats are usually sufficient. Consistency, Durability and How Fast it Dries Aqua Guard is more expensive than Leyland Fast Drying Satin, but it is infinitely better. In fact, there isn’t a lot of products available it isn’t better than. We’re talking about a fully water-based satinwood with great opacity, is easy to use, leaves a great finish and dries very durable. Does this paint have a strong odor? No, this paint has a low odor formulation, making it suitable for indoor use without causing strong odors or discomfort.It’s hard-wearing, easy to clean and usually very straightforward to use. While it’s most commonly found in only one or two shades of white, some brands offer a wider range of colours, giving you the option to truly personalise your space.

In terms of durability, the paint’s robustness post-curing was commendable, making it a decent option for exterior fascias, especially when used in conjunction with a fast-drying undercoat like Caparol. How Does it Compare to Johnstone’s Aqua Guard? Painting wood or metal can be simple, especially when you pair the best materials with the correct preparation. Discover our range of high quality wood paint and metal paint to give your interior or exterior surfaces the excellent finish it deserves.

Pre-order

Because it’s water-based, this paint will also never yellow with age, making it a perfect paint for any areas that might not get a lot of sunlight, such as skirting boards behind furniture and the inside of cupboards. It also comes in a great range of colours, although mostly pastel or neutral shades. Our interior and exterior wood paint can be used for a variety of surfaces, including wooden furniture, doors and floors, that are made from hardwood or softwood. Our selection of metal paint is the ideal choice for touching up wrought iron, cast iron, aluminium or galvanised metals. Discover our oil-based, water-based, acrylic and chalk paint to find the most appropriate for your project. It can be applied with either a paint brush or a foam roller, and getting a smooth surface with no streaks or drips is easy, even for beginners. Although it should always be applied in a well-ventilated area, it has a much weaker odour than other oil-based satinwood paints. It isn’t very easy to apply either and takes a little bit of getting used to. You can get a good finish with Leyland Fast Drying Satin if you use a soft brush and keep it wet. I dip mine in water every half hour to keep the paint from drying on the ferrule. Otherwise, it dries very fast and clogs, then becomes a nightmare! You can’t roll it either, even though the instructions say you can. Don’t even bother trying! Key Specs – Paint base: Water; Approx. coverage: 12m 2per litre; Touch-dry time: 2 hours; Recoat time: 6 hours; Other colours available: Yes, a wide range

Eggshell paints are closer in sheen to satinwood, but are a little more matte. Again, these are better suited to walls and ceilings as they aren’t as durable as satinwood. What do I need to consider when choosing a satinwood paint? The best satinwood paint you can buy in 2023 1. Crown Solo One Coat Satin Paint: The best one coat satinwood paint Whether you’re touching up the skirting boards or planning a big interior redesign, finding the best satinwood paint for your specific project is key. And while you’d be forgiven for not spotting the difference between the various brands of mid-sheen white, choosing the right paint will make the painting process and end result that much better. This Dulux paint will usually only need one or two coats, and is ready to recoat after six hours, meaning you can easily complete a decent-sized painting project in under a day. Cleaning up is a cinch, too. Given the great sheen and decent coverage, you may be surprised to hear that this satinwood paint is actually water-based, meaning brushes and rollers can be cleaned with just soapy water.Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. Gloss paints have been the go-to for windows, doors and skirting boards due to their robust nature and ability to be wiped clean, but are falling in popularity because of the dated finish and tendency to yellow over time. This satinwood paint from Leyland is an excellent all-rounder. Suitable for almost all projects, it’s easy to use, long-lasting and durable. While it will need two coats to get the fullest coverage, a little goes a very long way, and as you don’t need to use primer, it’s great for those on a budget. Leyland Fast Drying Satin will not adhere directly to old oil-based gloss or similar coatings, so you should use an adhesion primer if you intend to coat problem surfaces. Leyland recommend the use of its own “fast drying undercoat”, which is a fitting name really.