You have a typical home router in one room and your desktop PC and gaming console in the other. You want to connect both to Ethernet, but there’s only one Ethernet port in each room. You can run two cables from the router, plug them both into a splitter, plug the splitter into the wall, and reverse that on the other side with another splitter that plugs into both of the devices you want to connect. That’s about all a splitter can handle. No. While they are both examples of data network hardware, a hub is a Layer 1 device, which is part of the physical transport layer and acts as a broadcast/aggregator but does not manage any of the traffic.

If you can't get online there might be a problem with your computer, tablet or mobile device. Turn it off and then on and try again. if you've still got a problem then get some help from the manufacturer or supplier

Modernizing Ethernet switches

With its 48 Ethernet ports, the new EnGenius ECS2552FP managed switch offers plenty of connectivity even for the most demanding network infrastructure. The network switch with 32 x 1GbE and 16 x 2.5GbE supports both legacy and modern equipment. If that's not enough, four additional SFP+ ports allow easy scalability when connected to other ECS2552FP. A 740W PoE power supply available to all copper ports makes running power-hungry devices fuss-free. The second question will be whether or not you want Power over Ethernet (PoE) or not. This depends on what sort of devices you are going to connect and how much PoE budget they will need. You can get switches that have PoE on all ports and others that only have it on a set number of connections. But usually, it’s a straight choice – with or without PoE. You’ll always pay a little more for a switch with PoE. Ethernet continues to be a popular network technology as it offers several advantages. Most importantly, Ethernet is faster than other network technologies, including Wi-Fi. And as it uses a cable to transmit data from one device to another, it can provide consistent speed and reliability. In addition, you don't have to worry about network interference or physical barriers, something that wireless networks often have to deal with. Note that Ethernet hubs look much like switches, so don’t make the mistake of buying a hub when you really want a switch.

The installation of an ethernet cable is the same for most outbuildings, although their use may be slightly different. Summerhouses and log cabins can be used for streaming music or movies when converting the building into a space for entertainment. Garden rooms are often turned into a garden office and fast internet connectivity is essential for video calls. Even a shed being used as a workshop can benefit from ethernet to keep mobile devices connected. Record up to 600 hours of TV on the 1TB hard drive, across up to four channels at once when watching in aerial mode and up to two channels at once when watching in internet mode As more companies look to reopen their facilities in the wake of the global health crisis, the latest PoE standards, along with modern Ethernet switches with advanced capabilities, can help ensure they're providing an intelligent work environment that's also safe for workers and customers. For some limited situations, Ethernet splitters are a good option. However, it’s almost always better to opt for an Ethernet switch or hub. PoE refers to the ability to provide low-voltage (<100W), DC electrical power to network devices via the same, twisted-pair copper Ethernet cables used to transmit data. This eliminates the need for a separate AC power source, allowing for more flexible placement options without concern for proximity to a power outlet or the need to implement an AC electrical infrastructure. Examples of devices that use PoE include LED lighting, window shades, monitors, sensors, wireless access points, and voice over IP (VoIP) phones.Wait a couple of minutes for your Hub to start. The light will stay blue for more than 20 seconds when it’s ready Use the Power button to turn your Hub off and on again. If the light doesn't turn blue, use a paper-clip to press your Hub's Factory Reset button. There are two options for connecting the TV Box to the Hub. If your TV Box is close enough an Ethernet connection provides the best connection. If the TV Box is too far away to connect the Ethernet cable, you can connect via WiFi instead. Most switches for business use will have 16, 24, or 48 ports and are designed for deployment within the network fabric. They come with a variety of features and capabilities and these factors will also influence your choice.